Beko BDFS16020W User Manual page 33

Auto Tablet Feature
(Depends on model)
Auto Tablet is a feature which detects
the use of combined tablet detergents
automatically.
Drying performance of these type of
detergents is improved by adjusting
temperature and duration accordingly.
Owing to this feature, there is no need
to press any button in case of a tablet
detergent use.
Feature can be activated if automatic
detection is desired.
To activate / to deactivate:
1. After turning on the machine, press and
hold Time Delay and Programme keys
simultaneously for 3 seconds.
2. Press the Programme key until tablet
icon is displayed. When you enter the
Automatic Detergent Detection Feature
menu, tablet icon will start to flash and
the active setting will be displayed.
Automatic Detergent Detection ON - [P1]
Automatic Detergent Detection OFF - [P2]
3. Automatic Detergent Detection Feature
is turned ON and OFF with the Time
Delay key.
4. Turn off the machine with On/Off key to
save the changes.
Tablet Detergent indicator is displayed
only when activating and deactivating Auto
Tablet Feature from options menu.
SelfDry
(Depends on the Model)
"SelfDry" feature of your machine increases
drying efficiency of your machine and saves
energy. There are two options: "OFF" and
"ON".
To activate the feature of SelfDry:
1. Press SelfDry button. When the
function is active, the indicator showing
the selection of the function lights up.
2. SelfDry is activated.
When you activate this function, the door
of your machine opens automatically at the
end of the washing program.
To deactivate the feature of SelfDry:
1. Press the button of SelfDry. When the
function is deactivated, the indicator
showing the selection of the function
turns off.
2. SelfDry is deactivated.
SelfDry opens the door of the machine
at the end of the washing circle,
thanks to the "door opening shafts".
This process takes approximately 2
minutes. If the power fails while the
shafts are moving out, do not force
to close the door. When the power is
back, the process shall be completed,
and the shafts shall return to their initial
position.
The function of SelfDry may change
the duration of the selected program.
33/EN