Page 3
ASSEMBLY ASSEMBLY Rounded Rounded Side Side Tube with Tapered Ends Side Tube Tube with Tapered Tapered End and Regular End Long End • Place a tube with tapered end and regular end on a flat surface. • Fit a tube with tapered ends into the regular end, as shown. •...
Page 4
ASSEMBLY ASSEMBLY Medium Sleeves Short Sleeve • Locate the medium sleeves on the sides of the net. • First, fit the medium sleeve onto the side tube. Note: The short sleeve should not be fitted onto the tube. • Slide the sleeves and the net evenly around the frame, as shown. •...
Page 5
ASSEMBLY ASSEMBLY Short Sleeve Short Sleeve Long End of Tube Long End of Tube Short End of Tube Short End of Tube • Fit the long end of either remaining tube through the short sleeve. • Fit the long end of the remaining tube through the short sleeve and weave the tube through the openings on the edge of the net.
Page 6
ASSEMBLY ASSEMBLY Rounded Side • Insert the inflation pin into the ball. • Attach the pump (not included) to the pin. • Inflate the ball to a circumference of 15 " (39 cm), until firm. Do not over-inflate. • After inflating the ball, remove the pin. Store the pin out of the reach of children for future use.
BATTERY INSTALLATION BEGINNER BATTERY INSTALLATION BEGINNER Beginner’s score fun sounds when the ball hits the net! Power/Mode Switch Battery Compartment Top Edge Door of the Frame Target 1.5V x 3 "AAA" (LR03) • Locate the power/mode switch on the back of the target. Slide the switch to SHOWN ACTUAL SIZE 1 for beginners.
Consumer Advisory Service 1300 135 312. NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland. ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Scorekeeper • Hit the target with the ball for fun sounds! •...