Table of Contents
Advertisement
en Cleaning and servicing
Setting signal volume
Press
.
1.
To open the appliance settings,
2.
press
is flashing on the display.
a
Press
3.
and
flash in the display.
Press
repeatedly until the
4.
right signal volume has been set.
0, 1, 2 or 3 LEDs will light up ac-
cordingly. The signal tone selected
will be heard.
The factory setting is level 2 ("LED
A and LED B" → Page 15).
To save the settings, press
5.
for 3 seconds.
Restoring factory settings
Press
.
1.
To open the appliance settings,
2.
press
is flashing on the display.
a
Press
3.
and
flash in the display.
Press
to set the appliance
4.
back to the factory settings.
a The appliance is reset.
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
Never use detergents containing
▶
chlorine.
34
for 3 seconds.
repeatedly until
for 3 seconds.
repeatedly until
Remove any coarse soiling in the
1.
interior with a damp cloth.
Add detergent to the detergent dis-
2.
penser.
Select the programme with the
3.
highest temperature.
→ "Programmes", Page 17
"Start the programme without
4.
tableware." → Page 31
Cleaning products
Only use suitable cleaning products
to clean your appliance.
→ "Safe use", Page 10
Tips on appliance care
Follow the tips on appliance care to
make sure your appliance functions
properly at all times.
Action
Wipe the door seals,
the front of the dish-
,
washer and the con-
trol panel regularly us-
ing a damp cloth and
washing-up liquid.
If the appliance is not
going to be used for a
while, leave the door
slightly ajar.
Benefit
This ensures the parts
of the appliance will
remain clean and hy-
gienic.
This will prevent un-
pleasant odours.
Advertisement
Table of Contents
