Linksys WUSB11 User Manual page 7

4. The InstallShield Wizard will automatically choose a folder where Setup
will install files. Click Next.
5. The InstallShield Wizard will ask you to choose a wireless mode. Choose
the mode that applies to your network. Ad-Hoc Mode is used for simple
peer-to-peer networking or sharing of local resources between wireless
Networked PCs, and Infrastructure Mode allows a wireless network to be
integrated into an existing, wired network through an access point, permit-
ting roaming between access points while maintaining a connection to all
network resources. Click Next.
8
Instant Wireless Series
TM
Wireless USB Network Adapter
6. If you chose Infrastructure Mode, go on to Step 7 now. If you chose Ad-
Hoc Mode, choose the correct operating channel that applies to your net-
work. The channel you choose should be set as the same as the other
points in your wireless network. The default channel is set to Channel 6.
Click Next.
7. Enter in the name of your SSID for your Ad-Hoc or Infrastructure setting.
The SSID must be identical for all points in the network. To join any avail-
able SSID, type ANY. The default setting is linksys (all lowercase). Click
Next.
9