Compass - Cobra XRS 9740 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty
Assistance
Set/City Button
Select/Dim Button
Secondary Icons
Program/Mute Button
To Set the IntelliMute Activation Point Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, go to Set
Tone
IntelliMute.
Notice
None
Press and release the Set/City button Two beeps
to begin setting IntelliMute RPMs.
Rev your engine to the level you wish to None
set. Rev the engine slightly above idle and
in Icons
hold revs steady for two seconds.
At the desired rev level, press and Three beeps
release the Set/City button.
Press and release either the None
Intro Operation Customer Warranty
Assistance
Select/Dim button to proceed to the
next user mode or the Program/Mute
button to exit the Program mode.
Setting IntelliMute RRMs
condary Icons
Set Intel...
NOTE
If the unit is unable to sense usable pulses within three
Notice seconds or if you do not set a rev point within 20 seconds
of beginning these steps, IntelliMute will indicate an error
and automatically turn off.
Tone Visual Display Voice
One beep IntelliMute not set IntelliMute not set
Please try again Please try again
One beep IntelliMute Off IntelliMute Off
16 English
Main Icons
Your Detector
Intro

Compass

Your detector includes an internal
Intro Operation Customer
8-point Compass that will continuously
Assistance
display your current direction of travel:
N, NE, E, SE, S, SW, W or NW.
Secondary Icons
Secondary Icons
Calibrating the Compass
Visual Display Voice
NOTE
Set IntelliMute None
Before using it for the first time, you must calibrate the compass to
Notice
provide accurate indications of direction. See page 7 for instructions
Press SET Set Engine
at desired Revs
on using the Program mode to select Set Compass.
RPMs...
Calibration allows the compass electronics to measure and store
Main Icons
None None
information about the magnetic fields generated by your vehicle.
The compass will remain accurately calibrated as long as your detector is
mounted in the same place in your vehicle. If you change the location where
IntelliMute IntelliMute
the unit is mounted or move it to another vehicle, you must recalibrate the
Set! Set
Intro Operation Customer
Assistance
compass.
None None
The compass temporarily may not provide accurate readings if you are inside
a building or enclosure, or are close to a large metal tractor/trailer, truck, or
train. Once you are away from such a location, the compass will work
Secondary Icons
correctly again.
NOTE
PressSET... Intelli
When the instructions direct you to drive in two circles, a large parking
Mute
Notice
lot is the most convenient place to do so. It does not matter what
direction your vehicle is pointing when you start the circles, which
Set!
direction you go to make the circles, and it does not have to be exactly
two circles. You do NOT have to make perfect circles. You can drive in
IntelliMute IntelliMute Off
any pattern, as long as you make two complete turns. Four three-point
Not Set
turns, two small squares, or any two complete loops will work as well as
Intelli
IntelliMu...
two circles. It does not matter what size the circles are, if your speed is
Mute
constant, or how fast you make the circles [but less than two minutes].
Please tr...
Please be careful when making the circles and watch for other traffic.
Off
Settings
Operation Customer Warranty
Assistance N
NW NE
Warranty
8-Point
W
Compass
SW SE
S
Notice
Warranty
Nothing Comes Close to a Cobra
E
® 17