Box Contents: 2 x TWS Earphones 1 x USB Charging Case 1 x USB Micro B Charging Cable Product Diagram: Feature Description Press to play or pause Play/Pause / while playing music Call/Volume Button Press to accept, reject or redial last number called Microphone located in the right and left earphones for Microphone/LED...
Page 3
Displays the power and LED Status pairing status of the Indicator earphones Earphone speaker covered Speaker by a dustproof mesh Earphone speaker covered Speaker by a dustproof mesh Feature Description Connect to the USB USB Power Socket charging cable and suitable (Rear) USB power source Charging Ports...
Page 4
Bluetooth® is turned on. 3. Once your Bluetooth® is enabled; Scan for devices and the Bluetooth® name AA-2165 should appear. AA-2165 Bluetooth® Name: 4. Press the AA-2165 on the Bluetooth® device list and your smartphone should show that it is connected.
5. You will hear a voice prompt from the earphones saying “Connected”. The volume can be controlled by your smartphone or earphones. The battery status can also be shown in your Bluetooth settings. Note: The earphones will automatically turn off after 3 minutes or if they’re too far away from your device.
Music Playback: Function Button Press the play/call button t to pause the Pause current music track Press the play/pause button again after Play pausing to resume the current music track Press the play / call button 2 times to Next Track skip to the next music track Press the play / call button 3 times to Volume...
Charging Case: 1. Insert the USB micro B charging cable in a 5VDC mains power adaptor (not included) or a suitable USB charging port such as a computer. 2. Insert the micro B USB plug into the USB power socket of the charging case. 3.
Page 8
Problem: Solution: Ensure the USB charging cable is connected properly to a USB charging port or USB charging No Power / adaptor. LED Indicator Check to see if your USB power source is working correctly. Ensure the volume is correctly turned up on your smartphone.
Page 9
Safety: 1. Do not open the earphones or charging case of this product to prevent the unit from damage. 2. Keep the earphones and earphone charging case away from high temperatures as it may damage the device. 3. Do not expose the earphones or earphone charging case to water or liquids to prevent the unit from damage.
Specifications: Bluetooth® Version: 5.3+EDR Transmission Range: Up to 10m Frequency Response: 20Hz-20KHz Sensitivity: 95dB±3dB Mic Sensitivity: -42dB±3dB Impedance: 32Ω Driver Size: 10mm Playback Time: 2-4 Hours Talk Time: Up to 4 Hours Standby Time: Up to 100 Hours (Single) Up to 60 Hours (Both) Charging Time: Up to 1 Hour (Earphones) Up to 2 Hours (Charging Case) Battery: 3.7V Li-Ion, 30mA (Each Earphone)
Page 11
Distributed by: Electus Distribution Pty. Ltd. 46 Eastern Creek Drive, Eastern Creek NSW 2766 Australia Ph: 1300 738 555 Int’l: +61 2 8832 3200 Fax: 1300 738 500 www.electusdistribution.com.au...
Need help?
Do you have a question about the AA-2165 and is the answer not in the manual?
Questions and answers