Pop Alert; K, Ku And X Band Detection - Cobra XRS 9730 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty
Assistance
Set/City Button
Select/Dim Button
Program/Mute Button
Secondary Icons
To Calibrate the Compass Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, go to
Tone
Set Compass.
None
Notice
Press and release the Set/City button One (1) beep
to begin setting the compass.
Within two minutes, drive your Three beeps
vehicle in a circle twice, then press
the Set/City button again.
in Icons
Press and release either the Select/Dim None
button to proceed to the next user
Intro Operation Customer Warranty
mode or the Program/Mute button
Assistance
to exit Program mode.
Calibrate
Set Compass Compass
condary Icons
Set Compa... Drive in...
Press SET...
NOTE
If you do not press the Set/City button within two minutes after beginning
Notice
the set compass process, compass calibration will automatically terminate.
Tone Visual Display Voice
One beep Compass not set... Compass not set...
Please try again... Please try again...
18 English
Your Detector
Intro

Pop Alert

Pop Alert will alert you of Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect off.
To Turn Pop Detect Mode On or Off Using Program Mode
Secondary Icons
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Pop Detect.
Visual Display Voice
Set Compass None
Drive in 2 Set Compass
circles...
Press SET
when done...
Compass Set! Compass Set
For two

K, Ku and X Band Detection

seconds
The new Ku Band may be introduced to North America in the future. To prevent
followed by
false alerts until it is, the factory default for Ku Band detection is off. In parts of
direction of
North America, annoying false alerts from door openers and similar devices are
travel (N, NE,
triggered on the X Band and K Band. If desired, X Band or K Band can be turned
E, SE, S, SW,
off. The factory default for X Band and K Band detection is on.
W or NW)
None None
To Turn X, K and/or Ku Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to X, K or Ku band.
Direction
Compass Set of Travel
X-Band On
Compass N W h
X-Band On
Set!
X-Band Off
X-Band Off
Terminate
K-Band On
Compass n...
K-Band On
Please tr...
Settings
Operation Customer Warranty
Assistance
Tone Visual Display Voice
Two beeps Pop On Pop On
One beep Pop Off Pop Off
Notice
Pop Detect On Pop Detect Off
Pop On Pop Off
Tone Visual Display Voice
Two beeps X-Band On X On
One beep X-Band Off X Off
Two beeps K-Band On K On
One beep K-Band Off K Off
Two beeps Ku-Band On Ku On
One beep Ku-Band Off Ku Off
Ku-Band On Ku-Band Off
K-Band Off
K-Band Off Ku-Band On Ku-Band Off
Nothing Comes Close to a Cobra ® 19