Warranty; Settings; Highway/City Mode; Digiview Data Display Brightness - Cobra XRS 9545 Operating Instructions Manual

Settings

Your Detector
Intro Operation Customer

Warranty

Settings Assistance
When changing the Settings on your detector, please keep in mind:
Buttons can have multiple functions.
Depending on your choice of Voice Alert or Tone Alert mode, you will
Secondary Icons
hear either voice messages or tones confirming changes in settings.
All settings will be stored in memory when the power is
turned Off and recalled when the power is turned back On.

Highway/City Mode

Notice

Setting your detector to City mode delays all X band audio alerts until
the signal strength reaches Level 3. (A single beep will sound when the
signal is first detected.) This will reduce false alerts while you are driving
in, or near, urban areas where there are many sources for conflicting
X band signals such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear (either in Voice Alert or Tone Alert mode)
as you complete each step. The factory setting is Highway mode.
Highway Mode
h
City Mode
c
To Change From Highway Mode to City Mode
Press and release Tone Voice
the City button.
One beep City
To Change From City Mode Back to Highway Mode
Press and release Tone Voice
the City button again.
Two beeps Highway
6 English
Your Detector
Intro Operation

DigiView Data Display Brightness

•
You can choose from four (4) settings for Brightness
of the display. You can cycle through the settings by
repeatedly pushing the Dim button. The factory
setting is Bright.
Secondary Icons
Notice
Dim Button
Press and
release
To Change the Brightness to Dim
Press and release
the Dim button
once.
City Button
Press and
release
To Change the Brightness to Dimmer
Press and release
the Dim button
again.
To Change the Brightness to Dark
Press and release
the Dim button
Visual Display
a third time.
City blinks, then c appears
in the display
To Change the Brightness to Bright
Visual Display Press and release
the Dim button a
Highway blinks, then h
fourth time.
appears in the display
Settings
Customer Warranty
Assistance
Bright
Press and
Dark
release
Dim button
Dimmer
Dark Indicator
.
Tone Voice Visual Display
One beep Dim Dim blinks, then
display dims
Tone Voice Visual Display
One beep Dimmer Dimmer blinks, then
display dims further
Tone Voice Visual Display
One beep Dark Dark blinks, then display
goes dark (no visual alerts
will be seen)
Tone Voice Visual Display
Two beeps Bright Bright blinks, then display
returns to full brightness
Nothing Comes Close to a Cobra
Dim
® 7