Linksys WDT11 User Manual page 25

17. On this screen, you will enter your a unique Computer Name, which is
how your computer will be identified on the network. You will also assign
the computer to either a Workgroup or Domain, whichever is appropriate.
Select either Workgroup or Domain, and enter the name of which one is
appropriate. The Computer Name must be different than any other on the
Workgroup or Domain.
18. Windows NT has now completed installing the network. Click the Finish
button to continue and then restart your computer. Once your computer has
restarted, you can continue on to the Configuration Utility section.
NOTE: After you have installed the Network PC Card, reapply
the Windows NT service pack.
43
Instant Wireless Series
TM
Network PC Card and PCI Adapter
If You Have Installed Network Hardware Before:
1. Windows NT is not a
Plug-and-Play Operating
System and will not auto-
matically identify the
Network PC Card. To
begin setup, insert the
Setup Utility CD into
your CD-ROM drive.
Select Start, and then
Settings to bring up the
Control Panel. Then,
double-click on the
Network icon.
2. To add the Network PC Card,
you will want to click the
Adapters tab and then click
the Add button to continue.
44