Cobra XRS 9445 Operating Instructions Manual page 8

Settings
Your Detector
Intro Operation Customer Warranty
What to Remember While Using IntelliMute Assistance
IntelliMute works with both City and Auto Mute modes.
Whenever your engine revs are below the activation point, the dot next to
the large character on the right side of the display will remain lit. Above the
in Icons
Secondary Icons
activation point, the dot will blink twice every two seconds.
Below Activation Point Above Activation Point
in Icons
c c
X K Ka V S X K Ka V S
Intro Operation Customer Warranty
Assistance
Notice
If, for any reason, the unit stops sensing your engine's revs, IntelliMute
will indicate an error and automatically turn Off.
Intro Operation Customer Warranty
The rev point you set will be stored in the unit's memory when power is Assistance
condary Icons
turned Off and recalled each time the power is turned On.
NOTE
condary Icons
The rev point must be reset if you use your detector in a different vehicle.
Notice
NOTE
When initially choosing your IntelliMute activation point, a setting
Notice
of approximately 300 to 600 RPMs above idle is recommended.
Operation Customer Warranty
You can reset the activation point at any time to fit your individual
Assistance
preferences and driving style.
Setting the IntelliMute Activation Point
Customer
Installation
Assistance
Your detector must be installed in your vehicle.
CAUTION
Do not attempt to set the rev point while driving.
Notice Caution Your vehicle should be parked and idling. Warning
IntelliMute must be turned On before setting the activation point. Depending
on whether the unit is in Tone Alert or Voice Alert mode, you will hear a series
of beeps or voice messages as you follow the steps on the next page.
10 English
Settings
Your Detector
Intro Operation Customer Warranty
Assistance
Secondary Icons
IntelliMute Button
Press and release
To Set the IntelliMute Activation Point
Press and hold Notice Tone Voice
the IntelliMute
Two beeps Set Engine Revs
button for two
seconds.
Rev your engine to None None
Main Icons
the level you wish
to set (recommend
slightly above idle)
and hold revs steady
for two seconds.
Intro Operation Customer Warranty
At the desired Three beeps Assistance IntelliMute Set
rev level, press
and release the
IntelliMute
button.
Secondary Icons
NOTE
If the unit is unable to sense usable pulses within three
seconds or if you do not set a rev point within 20 seconds
Notice
of beginning these steps, IntelliMute will indicate an error
and automatically turn Off.
Tone Voice
Four beeps IntelliMute Error,
followed by
IntelliMute Off
Nothing Comes Close to a Cobra
Visual Display Main Icons Main Icons
None
Intro Operation Intro Customer Operation Warranty Customer Warranty
Assistance Assistance
Three bars will
Customer Customer
Installation Installation
Assistance Assistance
flash in succession
Secondary Icons Secondary Icons
Main Icons Main Icons
1 2 3
Notice Caution Notice Warning Caution Warning
Intro Operation Intro Customer Operation Warranty Customer Warranty
Assistance Assistance
All three bars flash
Customer Customer
Installation Installation
Assistance Assistance
three times
Secondary Icons Secondary Icons
1 2 3
Notice Caution Notice Warning Caution Warning
Visual Display
appears
E
E
X K Ka V S
® 11