Voice/Tone Setting; Radar Alert Settings - Cobra XRS 9440 Operating Instructions Manual

Settings
Your Detector

Voice/Tone Setting

You can set your detector to sound alerts with either a Voice
or a Tone. You can change settings by using the Mute button.
In Voice Alert mode, you will first hear several tones, then a
voice message announcing the type of signal detected, followed
by more tones. In Tone Alert mode, you will hear the tones only.
The factory setting is Voice Alert mode.
Mute Button
Press and hold for
two seconds
To Change From Voice Alert to Tone Alert
While no signal
Tone Voice
is being detected,
One beep Tone Alert
press and hold
the Mute button for
two seconds.
To Change From Tone Alert Back to Voice Alert
While no signal
Tone Voice
is being detected,
None Voice Alert
press and hold
the Mute button
for two seconds
again.
VG-2, Spectre 1 Alert Settings, K & Ku Band Detection
The detector is undetectable by police VG-2 and Spectre 1 radar detector
detectors and will alert you when such a device is in use near your vehicle.
During the alert, the unit continues to detect other signals. You can choose
whether or not you want your unit to show VG-2 and Spectre 1 alerts.
The factory setting is VG-2 and Spectre 1 alert Off. (See table on the next page.)
12 English
Settings
Your Detector
On/Off Indicator
X K Ka V S
To Turn VG-2 and Spectre 1 Alerts On and Off
While no signal
is being detected,
press and hold the
Dim button for four
seconds.

Radar Alert Settings

The detector allows you to choose whether it will show alerts on the X, K,
and Ku bands. The factory settings are: X Band and K Band On; Ku Band Off.
Visual Display
To Turn X Band On and Off
None
While no signal is
being detected, press
and hold both the Dim
and Mute buttons for
four seconds.
Visual Display To Turn K Band On and Off
None
While no signal is being
detected, press and
hold the Mute button
for four seconds.
To Turn Ku Band* On and Off
While no signal is being
detected, press and
hold the City button
for four seconds.
Dim Button
Press and hold
for two seconds
Tone Voice Visual Display
V will blink twice
On = Two Beeps Spectre VG-2 On
in the display
Off = One Beep Spectre VG-2 Off V will blink once
in the display
Tone Voice Visual Display
X On = Two beeps X On X will blink twice
in the display
X Off = One beep X Off X will blink once
in the display
Tone Voice Visual Display
K will blink twice
K On = Two beeps K On
in the display
K Off = One beep K Off K will blink once
in the display
Tone Voice Visual Display
X and K will blink
Ku On = Two beeps Ku On
twice in the display
Ku Off = One beep Ku Off X and K will blink
once in the display
Nothing Comes Close to a Cobra ® 13