Universal Devices Z-Matter Assembly Instructions page 2

4. Plugin the ZMatter board into the first mPCIe slot from the left. Ensure that it
latches in just like the SSD. Please note, you may not have a WiFI card.
5. Align the top panel on top of Polisy and move it backward so that you can see the
u.FL connectors on the board.
6. Gently push in the u.FL side of the antenna wires into the u.FL connectors.
Ensure that they click in.
7. Gently push the top panel back so that it's flush with the bottom and screw back
the 4 screws on the sides.
8. Attach the antennas one on each side.
NOTE: facing the front of the unit
• Z-Wave antenna has a
• Zigbee antenna has a
Yellow band on top and goes to the left
Red band on top and goes to the right