Related Manuals for ArduCAM 16MP Autofocus
Summary of Contents for ArduCAM 16MP Autofocus
- Page 1 16MP Autofocus Synchronized Quad-Camera Kit for Raspberry Pi Getting Started Published in January 2022 by ARDUCAM TECHNOLOGY CO., LIMITED...
-
Page 2: Installation
Packing List Arducam UC-440 3 x Screw 3 x Spacer 3 x Nut 1 x Flex Cable (For Raspberry Pi) 4 x 16MP Autofocus Camera Module 1 x Quad-Camera HAT (Exclusive Version) Arducam UC-693 4 x Flex Cable (For Cameras) 1. - Page 3 Installation 2.Connect the Quad-Camera HAT. 3. Connect the 4 camera modules to the Rx ports. 4. Power your Raspberry Pi on. 16MP Quad-Camera Kit for Raspberry Pi...
-
Page 4: Operating The Camera
1. Download the shell scripts You need to install the latest Raspberry Pi OS (after 2022/01/28), and do not execute rpi-update After installing the system and drivers (follow the above instructions), add the following information to wget -O install_pivariety_pkgs.sh https:/ /github.com/ArduCAM/Arducam-Pivariety-V4L2-Driver/releases/download/install_script/install_pivariety_pkgs.sh /boot/config.txt: [cm4] chmod +x install_pivariety_pkgs.sh... - Page 5 Operating The Camera 1. Download the shell scripts wget -O install_pivariety_pkgs.sh https:/ / github.com/ArduCAM/Arducam-Pivariety-V4L2-Driver/releases/download/install_script/install_pivariety_pkgs.sh chmod +x install_pivariety_pkgs.sh 2. Update your Pi sudo apt update 3. Install libcamra-dev ./install_pivariety_pkgs.sh -p libcamera_dev 4. Install libcamera-apps ./install_pivariety_pkgs.sh -p libcamera_apps 5. Install the kernel driver ./install_pivariety_pkgs.sh -p imx519_kernel_driver_low_speed...
- Page 6 Any manual focus or camera control adjustments (exposure/gain/white balance/etc.) will also be applied to 4 cameras at the same time. For advanced instructions please visit: https://www.arducam.com/docs/cameras-for-raspberry-pi/synchronize d-stereo-camera-hat/ Switch the Channel There are four channels available with the quad-camera kit. Each channel represents a...
-
Page 7: Instructions For Safe Use
Instructions for Safe Use To properly use the Arducam quad-camera kit, kindly note: Before connecting, you should always power the Raspberry Pi o and remove the power supply first. Make sure the cable on the camera board is locked in place. - Page 8 MIPI DSI and MIPI CSI are service marks of MIPI Alliance, Inc Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi Foundation Arducam High-Resolution Autofocus Camera And Arducam logo are trademarks of ARDUCAM TECHNOLOGY CO., LIMITED...