Table of Contents
Advertisement
Help Guide
Digital Camera
ZV-1F
ISO (still image/movie)
Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher
the sensitivity.
ISO on the control wheel → select desired setting.
1
You can also select MENU →
Menu item details
ISO AUTO:
Sets the ISO sensitivity automatically.
ISO 80 – ISO 12800:
Sets the ISO sensitivity manually. Selecting a larger number increases the ISO sensitivity.
Hint
The higher the ISO value, the more noise will appear on the images.
The available ISO settings will differ depending on whether you are shooting still images, shooting movies, or shooting slow-
motion/quick-motion movies.
When shooting movies, ISO values between 125 and 12800 are available. If the ISO value is set to a value smaller than 125, the
setting is automatically switched to 125. When you finish recording the movie, the ISO value returns to the original setting.
The available range for ISO sensitivity varies depending on the setting for [Gamma] under [
Note
[
ISO] is set to [ISO AUTO] in the following shooting modes:
[Intelligent Auto]
When the ISO sensitivity is set to a value lower than ISO 125, the range for recordable subject brightness (dynamic range) may
decrease.
If you point the camera at an extremely strong light source while shooting images with a low ISO sensitivity, highlighted areas in
the images may be recorded as black areas.
(Exposure/Color) → [Exposure] → [
5-041-856-11(1) Copyright 2022 Sony Corporation
119
ISO].
Picture Profile].
Advertisement
Table of Contents
