Chapter 4: Windows Driver Setup; Overview; The Autorun Bi-Admin Management Utility Installation - Linksys PPS1UW User Manual

Instant etherfast series etherfast wireless ready usb printserver
Hide thumbs Also See for PPS1UW:
Table of Contents

Advertisement

Chapter 4: Windows Driver Setup

Overview

This section installs the PrintServer's software on your Windows 95, 98,
Millennium, NT, 2000, or XP computers to give them PrintServer printing abil-
ities. The PrintServer is fully compatible with Windows 95, 98, Millennium,
NT 4.0, 2000, and XP environments.
At this point, you must have:
the PrintServer hardware installed on your network. If not, see Chapter 3:
Hardware Installation.
TCP/IP installed on each of your computers.
an IP address assigned to each of the computers on your network. If not, see
Chapter 9: DHCP Support for the Wireless-Ready PrintServer.
an IP address assigned to the PrintServer. By default the PrintServer has
DHCP enabled. If you need to assign an IP address, go to Chapter 5: Bi-
Admin: PrintServer Management.
This setup should be completed on the network administrator's computer
before all other users' computers on the network. The PrintServer's IP address
will be assigned in this first installation on the network administrator's com-
puter only, which takes three extra steps.
It is assumed that your CD-ROM drive's letter name is designated as "D". If
your CD drive is named another letter, replace all instances of "D" with the
appropriate letter.
If you need to install the PrintServer's driver on computers without a CD-ROM
drive, you can create a setup disk by using a computer with a CD-ROM drive
to copy the contents of D:\Driver\Win9xNT onto a floppy disk.
7
Instant EtherFast
®
Series
EtherFast
®
Wireless-Ready USB PrintServer

The Autorun Bi-Admin Management Utility Installation

1. Insert the Setup Utility CD. A built-in autorun will begin the installation of
the PrintServer's Bi-Admin Management Utility, and display Figure 4-1.
Click the product you wish to install, followed by the Install tab to continue.
Figure 4-1
2. The installation routine will begin to run and display Figure 4-2. Close any
other programs you might have running during this installation procedure, and
click the Next button to continue or Cancel to forgo installation.
Figure 4-2
8

Advertisement

Table of Contents
loading

Table of Contents