Table of Contents
Advertisement
Chapter 4
Scanning for broadcast channels
This section describes how to scan for broadcast
channels automatically. This may be done in either of
the cases below:
- you are prompted that there are no broadcast
channels in TV mode.
- you want to update your broadcast channels.
1. Press
on the remote control and select Settings
> TV inputs > Live TV > Set up input > Scan for
channels, then press OK to enter.
2. Select Antenna and press OK to start scanning
channels.
Note: You can also press
and press
press OK to enter.
Using Subtitles
You can enable subtitles for each TV channel. Subtitles
are broadcast via DVB-T digital broadcasts. With digital
broadcasts, you have the additional option of selecting a
preferred subtitle language.
Turning on/off Subtitles
1. Press
on the remote control, select Settings >
Accessibility > Subtitles mode and press OK
enter.
2. Select the Off/On always/On replay/On mute
option, and press OK to disable/enable this function.
3. Press
to close the menu.
Set Subtitle preferred language
1. Press
on the remote control, select Settings >
Accessibility > Preferred language for subtitles
and press OK
to enter.
2. Press
select a subtitle language as your
preferred language and press OK to confirm.
3. Press
to close the menu.
Turning on/off Hard of hearing
1. Press
on the remote control, select Settings >
Accessibility > Hard of hearing and press OK
enter.
2. Select the On/Off option, and press OK to enable/
disable this function.
3. Press
to close the menu.
Consumer Electronics Control (CEC)
Use this function to search for CEC devices connected to
the HDMI sockets in your TV and enable one-touch play
and one-touch standby between CEC devices.
Enabling or disabling CEC
1. Press
on the remote control, select Settings >
System > Control other devices (CEC) and press
OK
to enter.
One
2. Select the
-touch play/System standby option,
and press OK to enable/disable the option.
3. Press
to close the menu.
on the remote control
to select Live TV, then
to
to
Using More of Your TV
Using One-touch play
Enables other devices to automatically switch the TV to
use it as the active source/input when playback starts.
Press OK to turn it on to enable this function.
Using System standby
Enables all CEC devices to automatically go to the
standby mode when your TV goes to standby mode.
Press OK to enable this function.
Note: The CEC functions depend on the devices
connected and it is possible that some
devices may not interoperate correctly when
connected to this TV. The user manual or
the manufacturer of the problematic devices
should be consulted for further information.
HbbTV
HbbTV (Hybrid broadcast broadband TV) is a service
offered by certain broadcasters and available only on
some digital TV channels. HbbTV delivers interactive
television over broadband Internet. These interactive
features are added to and enrich the normal digital
programmes, and include services such as digital
teletext, electronic programme guide, games, voting,
specific information related to the current programme,
interactive advertising, information magazines, catch-up
TV, etc.
To use HbbTV please ensure your TV is connected to
Internet and HbbTV is switched on.
Notes:
- HbbTV services are broadcast- or country-
dependent and may be unavailable in your area.
- You cannot download files to your TV with HbbTV
function.
- Application provider or broadcasting related
conditions may cause an HbbTV application to be
unavailable temporarily.
- To access HbbTV applications you must connect
your TV to the Internet via a broadband link.
HbbTV applications may not work correctly in case
of network related issues.
HbbTV access
1. Press
on the remote control, select Settings >
TV inputs > Live TV > HbbTV and press OK
enter.
2. Select the Enable 'HbbTV' option, and press OK to
enable the function.
3. When you tune to a digital TV channel that offers
HbbTV, this will be signalled to you by an on-screen
indication (generally a red button, but other colour
buttons may also be used). Press the indicated
colour button to open the interactive pages.
4. Use
and the colour buttons to navigate
through the HbbTV pages and press OK to confirm.
HbbTV deactivation
To avoid disturbances that may be caused by HbbTV
broadcasting tests, you can turn off the HbbTV function:
10
to
Advertisement
Table of Contents
