Dual XDC100BT Installation & Owner's Manual page 17

Recent Calls List
Redialing the last
number
Receiving a phone call
Ending a Phone Call
Streaming Audio
Bluetooth
Press SELECT from Bluetooth mode to view recent calls
dialed, received or missed while connected to the head
unit. Turn the volume knob to cycle through the recent
phone numbers. Press SELECT or
To redial the last phone number, press
mode. Press
number.
Incoming phone calls will automatically appear on the
display and a ring tone will be heard.
Note: The volume of the ring tone depends on the
volume level of the unit. The incoming ring tone may not
be heard if the volume is set to a low level or mute is
activated.
• Press
• Press and hold
Note: If Auto Answer is set to ON in the setup menu, all
phone calls will be received automatically.
During an active phone call, press
If the phone call was received when listening to music in
another mode, the unit will resume the previous mode.
The unit supports A2DP (advanced audio distribution
profile) wireless streaming audio from your Bluetooth
mobile device directly to your head unit. The following
functions can be used to control the music:
• Press
• Press
• Press
playback.
XDM290BT
Operation
®
or SELECT again to redial the phone
to receive the incoming phone call.
to refuse the incoming phone call.
ll
to skip to the next available audio track.
nn
to skip to the previous audio track.
l
/ II to toggle between play and pause during
OPERATION
to dial
from Bluetooth
to end a phone call.
17