Linksys WRVS4400N User Manual page 99

Wireless-N Gigabit Security Router with VPN
"Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter" for details on getting an
IP address. Then check the Enable checkbox for the entry. Consider the examples below:
Application Start and End
UT 7777 to 27900
Halflife 27015 to 27015
PC Anywhere 5631 to 5631
VPN IPSEC 500 to 500
D. Configure as many entries as you like.
When you have completed the configuration, click the Save Settings button.
8. I can't get the Internet game, server, or application to work.
If you are having difficulties getting any Internet game, server, or application to function properly, consider
exposing one PC to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available when an
application requires too many ports or when you are not sure which port services to use. Make sure you
disable all the forwarding entries if you want to successfully use DMZ hosting, since forwarding has priority
over DMZ hosting. (In other words, data that enters the Router will be checked first by the forwarding settings.
If the port number that the data enters from does not have port forwarding, then the Router will send the data
to whichever PC or network device you set for DMZ hosting.) Follow these steps to set DMZ hosting:
A. Access the Router's Web-based Utility by going to http://192.168.1.1 or the IP address of the Router. Go
to the Firewall => Single Port Forwarding tab.
B. Disable or remove the entries you have entered for forwarding. Keep this information in case you want to
use it at a later time.
C. Go to the Setup => DMZ tab.
D. Enter the Ethernet adapter's IP address of the computer you want exposed to the Internet. This will bypass
the NAT security for that computer. Please refer to "Appendix E: Finding the MAC Address and IP Address
for Your Ethernet Adapter" for details on getting an IP address.
Once completed with the configuration, click the Save Settings button.
Appendix A: Troubleshooting
Common Problems and Solutions
Protocol IP Address
Both 192.168.1.100
Both 192.168.1.105
UDP 192.168.1.102
UDP 192.168.1.100
Enabled
X
X
X
X
91