Dark Matter Arcade Fighting Stick User Manual page 11

Windows PC/Android
Perform the following steps to connect the Arcade Fighting Stick to a PC running Windows® 7 or later
or a mobile device running Android™ 4.0 or later.
1. Open the STORAGE SPACE cover and pull out the built-in cable.
2. Position the built-in cable in the CABLE OUTLET on the STORAGE SPACE cover, then close
the cover.
3. Plug the built-in cable into a USB port on your Windows PC or Android device. After 30
seconds, the KEY LOCK LEDS will flash three times, then return to indicating the KEY LOCK
status.
4. By default, the Arcade Flight Stick starts in XInput mode. If you want to switch to
DirectInput mode, press and hold the SWITCH/TOUCHPAD BUTTON for 2 seconds. The two
KEY LOCK LEDS will flash alternately, indicating that the Arcade Fighting Stick has switched
modes. To switch back to XInput mode, press and hold the SWITCH/TOUCHPAD BUTTON for
2 seconds.
11