Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Dark Matter Arcade Fighting Stick
- Page 1 Arcade Fighting Stick P/N 43710 User's Manual...
-
Page 2: Safety Warnings And Guidelines
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. Do not expose this device to water or moisture •... -
Page 3: Package Contents
1x Hex Screwdriver 1x USB Cable 1x User's Manual SYSTEM REQUIREMENTS You must be using one of the following systems to connect and use this Arcade Fighting Stick. Windows® 7 or later • Xbox One™, Xbox Series S™, or Xbox Series X™... -
Page 4: Product Overview
PRODUCT OVERVIEW Top Panel TURBO SWITCH: Simultaneously press one of the ACTION BUTTONS and slide the TURBO SWITCH to the ON position to enable the turbo function for that button. CONTROL STICK SWITCH: Use this switch to determine the control represented by the CONTROL STICK. - Page 5 HOME BUTTON: Emulates the HOME button on a controller. SHARE BUTTON: Emulates the SHARE button on a controller. OPTIONS BUTTON: Emulates the OPTIONS button on a controller. KEY LOCK BUTTON: Press the button to toggle KEY LOCK on or off. When KEY LOCK is on, the HOME, SHARE, OPTIONS, L3, and R3 buttons are disabled.
- Page 6 USB PORT: USB port for connecting an Xbox® or PS4™ controller. The original controller must be connected to the Arcade Fighting Stick for it to function properly with the Xbox or PS4 consoles. Nintendo Switch®, PC, and Android™ devices do not need a controller connected to function.
- Page 7 Rear Panel (Open) HEX SCREWDRIVER: Storage location for the included Hex Screwdriver.
- Page 8 CONNECTING THE FIGHTING STICK PS4 Consoles Perform the following steps to connect the Arcade Fighting Stick to a PS4™, PS4 Slim, or PS4 Pro. Ensure that the DualShock® controller is powered off. Open the STORAGE SPACE cover and pull out the built-in cable.
- Page 9 Press the HOME button to start the game. Xbox Consoles Perform the following steps to connect the Arcade Fighting Stick to an Xbox One™, Xbox Series S™, or Xbox Series X™. Open the STORAGE SPACE cover and pull out the built-in cable.
- Page 10 Press the HOME button to start the game. Nintendo Switch Console Perform the following steps to connect the Arcade Fighting Stick to a Nintendo Switch®. Open the STORAGE SPACE cover and pull out the built-in cable. Position the built-in cable in the CABLE OUTLET on the STORAGE SPACE cover, then close the cover.
- Page 11 Windows PC/Android Perform the following steps to connect the Arcade Fighting Stick to a PC running Windows® 7 or later or a mobile device running Android™ 4.0 or later. Open the STORAGE SPACE cover and pull out the built-in cable.
-
Page 12: Button Replacement
Open the STORAGE SPACE cover, remove the Hex Screwdriver, then close the cover. Use the included Hex Screwdriver to remove the seven screws securing the base plate to the Arcade Fighting Stick frame. Remove the base plate. Disconnect the wire from the button you want to replace. - Page 13 Insert the replacement button into the top panel, then rotate it until you hear a click, indicating that the button is locked into place. Reconnect the wire to the button. The following chart shows which color wires connect to each button. Position the base plate on the frame, then use the Hex Screwdriver to secure it in place using the seven screws removed in step 2.
- Page 14 PANEL WALLPAPER REPLACEMENT You can customize your Arcade Fighting Stick by replacing the decorative wallpaper under the acrylic top panel with a design of your choosing. Perform the following steps to replace the panel wallpaper. Open the STORAGE SPACE cover, remove the Hex Screwdriver, then close the cover.
- Page 15 For each button, press the plastic tabs on each side of the button to remove it from the top panel. Use a flat blade screwdriver (not included) to secure the center shaft at the bottom of the joystick to prevent it from turning, then unscrew the small ball at the top of the joystick. Use the included Hex Screwdriver to remove the six screws that secure the top panel to the frame, then remove the top panel.
- Page 16 Position the top panel on the frame, then use the included Hex Screwdriver to secure it in place using the six screws removed in step 7. Use a flat blade screwdriver (not included) to secure the center shaft at the bottom of the joystick to prevent it from turning, then screw the small ball back onto the top of the joystick.
-
Page 17: Technical Support
TECHNICAL SUPPORT Monoprice™ is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. -
Page 18: Regulatory Compliance
REGULATORY COMPLIANCE Notice for FCC This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifying the equipment without Monoprice's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. - Page 19 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Monoprice™, Dark Matter™, the Dark Matter logo, and all Monoprice logos are trademarks of Monoprice Inc.