Page 1
Art No 55400 BBR 120: Art No 55800 Thank you for purchasing this HiB product. Please read through these instructions carefully and refer back to them during installation to ensure that your product is fitted safely and that it retains its high quality finish.
Electrical Safety Information HiB recommends that all electrical bathroom products must be installed in accordance with current building and wiring regulations. If in doubt please contact an electrician. Before drilling ensure that there are no hidden cables or pipes in the wall.
Neutral supply can be Blue or Black LUMINAIRE MAINS SUPPLY What’s in the Box? Cabinet and Trim set sold seperately. Vanquish Cabinet: • Vanquish Cabinet • Glass shelves • Mounting bracket • Fittings pack Trim Set: • Trim • Fittings pack hib.co.uk...
Tools Required Pencil Spirit Level Drill Drill bit Screwdriver Adjustment Move door(s) up/down Move door(s) le /right Move door away/towards the cabinet Door Adjustment Door Removal...
Cabinet Installation Before installation, ensure the domestic electrical mains supply to which the cabinet is to be connected is turned off. Before drilling, ensure that there are no hidden cables or pipes in the wall. It is recommended that this product is installed by two people. This product can only be recessed fitted into a wall.
3. Slide the trim frame over the cabinet and postion in line with the securing holes on each side of the cabinet carcass . See Fig 9 4. Secure the new trim frame in place using the supplied screws and washers 5. Follow cabinet installation instructions opposite to complete install. Fig 9. hib.co.uk...
Need help?
Do you have a question about the Vanquish 50 and is the answer not in the manual?
Questions and answers