Table of Contents
Advertisement
Quick Links
DUSK
Dusk 50:
Art No 54000
Dusk 80:
Art No 54200
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to
them during installation to ensure that your product is fitted safely
and that it retains its high quality finish.
/
Dusk 60:
Art No 54100
FI#02 024 R201113
Ver No.
1.0 Jan 2021
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HiB Dusk 50
Summary of Contents for HiB Dusk 50
- Page 1 Art No 54100 Dusk 80: Art No 54200 Thank you for purchasing this HiB product. Please read through these instructions carefully and refer back to them during installation to ensure that your product is fitted safely and that it retains its high quality finish.
-
Page 2: Electrical Safety Information
Electrical Safety Information HiB recommends that all electrical bathroom products must be installed in accordance with current building and wiring regulations. If in doubt please contact an electrician. Before drilling ensure that there are no hidden cables or pipes in the wall. -
Page 3: Electrical Information
Neutral supply can be Blue or Black LUMINAIRE MAINS SUPPLY What’s in the Box? • Dusk Cabinet • Glass Shelves* • Silicone shelf mat • Mounting bar • Fittings pack *50cm Cabinet has 3 shelves, 60cm & 80cm Cabinets have 6 shelves hib.co.uk... -
Page 4: Tools Required
Tools Required Pencil Spirit Level Drill Drill bit Screwdriver Figures Fig 2. - Marking out the Mounting Bracket Fig 3. - Mounting Bracket Fig 4. - Securing Cabinet to the wall... - Page 5 Fig 5. - Shelf brackets Adjustment Move door(s) up/down Move door away/towards the cabinet Move door(s) left/right Door adjustment hib.co.uk...
-
Page 6: Installation
Installation Before installation, ensure the domestic electrical mains supply to which the cabinet is to be connected is turned off. Before drilling, ensure that there are no hidden cables or pipes in the wall. NB. Dusk Cabinets must be installed with a minimum distance of 150mm (Reflective surfaces may increase requirement) between the infra- red sensor switch and any adjacent wall or object to ensure correct operation of the sensor. -
Page 7: Operation
Reasonable force may be required to fully insert the plug. Make sure that the cabinet is held firmly so that it is not pushed off the wall. After a few uses, stiffness will ease and the socket will function as normal. hib.co.uk... - Page 8 Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN ©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter specifications as necessary.
Need help?
Do you have a question about the Dusk 50 and is the answer not in the manual?
Questions and answers