Performance; Names Of Each Parts - Hitachi UST-9124 Instruction Manual

2-3. Performance

For measurement tolerances, operating tolerances, and other data, refer to the instruction manual for the
ultrasound diagnostic instrument.
2-4. Name of each parts
Rubber boot
This covers the insertion portion
for preventing infection. Follow
the instructions in section 4-2.
The dimple corresponds to the
front mark (direction mark) on
the image display.
Ultrasonic irradiation area
This incorporates an electronic
convex transducer.
Connector
This is the part that connects the ultrasound
diagnostic instrument and probe. Follow the
instructions in section 4-4.
Caution
Do not pull, bend, twist, or apply excessive force to the cable.
The conductors may break and the cable may become unusable.
Do not subject the ultrasonic radiation part to hard impact.
The impact may cause damage to the transducer, and that results in noise or no echo in the image.
In most cases, the ultrasonic radiation part itself is not damaged because the part is made of elastic
material.
Handle
This section is held when performing insertion,
puncturing, and other operations.
Insertion portion
The component that is inserted
into the patient.
-13-
MN1-1162 Rev. 21
Cable
This cable propagates the
ultrasonic signals that are
sent and received.