Sunforce BLUE SKY ENERGY IPN Remote Installation And Operation Manual

Download this manual

IPN Remote Manual

Installation and Operation Manual

IPN™ NETWORK COMPATIBLE CHARGE

CONTROLLER AND BATTERY SYSTEM MONITOR

BLUE SKY ENERGY

2598 FORTUNE WAY • SUITE K

VISTA, CA 92081 • USA

https://sunforgellc.com/blue-sky-energy

BLUE SKY ENERGY IPN REMOTE MANUAL, REV G | 2022

This manual includes important safety instructions

for the IPN Remote (IPNREM).

Save these instructions.

Need help?

Do you have a question about the BLUE SKY ENERGY IPN Remote and is the answer not in the manual?

Page 1 CONTROLLER AND BATTERY SYSTEM MONITOR BLUE SKY ENERGY 2598 FORTUNE WAY • SUITE K VISTA, CA 92081 • USA https://sunforgellc.com/blue-sky-energy BLUE SKY ENERGY IPN REMOTE MANUAL, REV G | 2022 This manual includes important safety instructions for the IPN Remote (IPNREM). Save these instructions.
Page 2 Product Certifications CONFORMS TO: EN 61000-6-2:2005 EN 61000-6-3:2007 + A1:2011 AS/NZS 60000-6-3:2012 FCC CFR 47 Part 15 Subpart B This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operations.
Page 3 Operation The IPN Remote provides a digital display of battery voltage and output charge current. The display alternates between voltage and output current when charging. Current is displayed when the “AMPS” indicator is ON and can be the total of all controllers on the IPN network (factory default), or the current of a single controller on the IPN network.
Page 4 Troubleshooting Guide Symptom Probable Cause Item to Examine or Correct Battery disconnected, overly discharged (<9 V), or connected reverse polarity. Battery powers unit, Completely dead, No battery power not PV (Panel). no display Cable Faulty Cable faulty Display turns on, Display not but battery voltage One charge controller only must be Master.