Getting Started; Charging The Battery; Putting The Headphones On; Switching The Headphones On/Off - Medion MD 43453 Instructions Manual

6.

Getting started

6.1.

Charging the battery

 Use the supplied USB charging cable to connect the Mi-
cro USB charging port to your PC or notebook.
The charging LED on the headphones lights up red as soon
as charging begins.
 Charge the headphone battery for at least three hours
while the headphones are switched off.
The charging LED turns off when the headphones are fully
charged.
6.2.

Putting the headphones on

 Open up the earpieces.
 Set the headband length so that the headphones fit
comfortably on your head.
6.3. Switching the headphones on/off
 Press and hold the
and the operating LED flashes blue/red.
The headphones are switched on and ready for connection
with a Bluetooth-enabled audio output device.
Immediately after being switched on, the head-
phones attempt to connect to the last device con-
nected before they were switched off.
 To switch off the headphones, press and hold the
button until you hear a sound and the blue operating
LED turns off.
40
button until you hear a sound