Linksys E4200 - Linksys E1500 User Manual

Linksys E4200

Linksys E4200
Model Name Linksys E4200
Description Maximum Performance Wireless-N Router
Model Number E4200
Standards 802.11n, 802.11a, 802.11g, 802.11b, 802.3,
802.3u, 802.3ab
Radio Frequency 2.4 and 5 GHz
Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet)
Ports Power, USB, Internet, Ethernet (1-4)
Buttons Reset, Wi-Fi Protected Setup
LEDs Top panel: Power
Back panel: Internet, Ethernet (1-4)
Number of Antennas 6 total, 3 internal antennas per
each 2.4 GHz and 5 GHz radio band
Detachable (y/n) No
Modulations 802.11b: CCK, QPSK, BPSK
802.11g: OFDM
802.11a: OFDM
802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Receive Sensitivity 2.4 GHz
802.11b: -87 dBm @ 11 Mbps (Typical)
802.11g: -77 dBm @ 54 Mbps (Typical)
802.11n: 20 MHz: -70 dBm @ MCS23 (Typical)
802.11n: 40 MHz: -66 dBm @ MCS23 (Typical)
5 GHz
802.11a: -74 dBm @ 54 Mbps (Typical)
802.11n: 20 MHz: -67 dBm @ MCS23 (Typical)
802.11n: 40 MHz: -64 dBm @ MCS23 (Typical)
Antenna Gain in dBi 2.4 GHz (3 internal PIFA antennas)
PIFA 1 ≤ 3.31 dBi (Right)
PIFA 2 ≤ 3.45 dBi (Front)
PIFA 3 ≤ 1.96 dBi (Left)
5 GHz (3 internal PIFA antennas)
PIFA 1 ≤ 3.71 dBi (Right)
PIFA 2 ≤ 3.60 dBi (Front)
PIFA 3 ≤ 4.27 dBi (Left)
Supported File Systems
for Storage Device FAT32, NTFS, and HFS+
UPnP Supported
Security Features WEP, WPA, WPA2
Security Key Bits Up to 128-bit encryption
Environmental
Dimensions 8.86" x 0.98" x 6.30"
(225 x 25 x 160 mm)
Unit Weight 12.7 oz (0.36 g)
Power 12V, 2A
Certifications FCC, IC, CE, Wi-Fi a/b/g/n,
Windows 7, DLNA
Operating Temp. 32 to 104°F (0 to 40°C)
Storage Temp. -4 to 140°F (-20 to 60°C)
Operating Humidity 10 to 80% relative humidity,
non-condensing
Storage Humidity 5 to 90% non-condensing
NoteS
For regulatory, warranty, and safety information, see the CD that
came with your router or go to Linksys.com/support.
Specifications are subject to change without notice.
Maximum performance derived from IEEE Standard 802.11
specifications. Actual performance can vary, including lower
wireless network capacity, data throughput rate, range and
coverage. Performance depends on many factors, conditions and
variables, including distance from the access point, volume of
network traffic, building materials and construction, operating
system used, mix of wireless products used, interference and other
adverse conditions.
Specifications
75