Eliminating Malfunctions; Malfunctions When Starting; Table 16: Malfunctions When Starting - Delayed Start-Up; Table 17: Malfunctions When Starting - Vibrations - ABB HT574256 Original Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
7 Eliminating malfunctions / 7.1 Malfunctions when starting
7

Eliminating malfunctions

7.1

Malfunctions when starting

Delayed start-up
Possible causes
Turbocharger Turbocharger contaminated
Bearing damaged
Rotor rubbing
Foreign object in the turbocharger
Table 16: Malfunctions when starting – Delayed start-up
Vibrations
Possible causes
Engine Vibrations from engine
Turbocharger Rotor unbalance
Turbine or compressor damaged
Bearing damaged
Table 17: Malfunctions when starting – Vibrations
Rubbing of rotating parts
Normal behaviour, not a malfunction
Turbocharger A minimal and uniform wear at the circumference of the rotor components caused
by slight local rubbing against adjacent components is permitted. This causes the
compressor or turbine blades to be somewhat shortened. To prevent significant
loss of efficiency, specific tolerances must be fulfilled.
¡
If there is any doubt about the extent of the rubbing, contact an ABB Tur-
bocharging Service Station.
¡
Have a dimension check carried out by an ABB Turbocharging Service Sta-
tion.
Table 18: Malfunctions when starting – Rubbing of rotating parts
© Copyright 2017 ABB. All rights reserved.
Remedy
Clean (see chapter
work →40)
Contact ABB Turbocharging Service Sta-
tion
Remedy
Contact enginebuilder
Contact ABB Turbocharging Service Sta-
tion
HZTL4031_EN
Periodic maintenance
Revision F August 2017