Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Zenitel ELSII-10HM+
Summary of Contents for Zenitel ELSII-10HM+
- Page 1 Network Speaker ELSII-10HM+ Mounting & Installation Manual A100K12171...
- Page 2 1 Safety Information This manual describes the necessary steps to mount and install the Zenitel Network Speakers. It contains important instructions that must be followed. The Network Speakers should be installed by a competent person in accordance with national and local regulations.
- Page 3 2 ELSII-10HM+ Unscrew the ELSII-10HM+ from the mounting bracket, and place the bracket on the specified location. The speakers can be mounted both horizontally and vertically. In this ELSII-10HM+ example the speaker is mounted horizontally. Mounting & Installation of ELSII-10HM+ Mount the speaker at a height between 1,5-3 m for optimal placement of the speaker microphones’...
- Page 4 Fasten the speaker to the mounting bracket. Then remove the back plate Due to the bracket material, use as low a tightening torque as on the speaker. possible when mounting the unit to the surface (1.5 Nm max.) Wall mounting - recommended screws: Pan Head DIN7981 for plug (Dry wall/ Concrete) or wooden wall, etc.
- Page 5 Verify that microphone and speaker wires are correctly connected. Connect the speaker to the network. Speaker Microphone Yellow Gland Microphone Wires Microphone White Black Speaker Wires Reattach the back plate. The speaker can operate in three different modes, depending on what kind of server it should register to.
- Page 6 Dimensions (HxWxD) 144 x 186 x 207 mm The WEEE Directive does not legislate that Zenitel, as a ‘producer’, shall collect ‘end of life’ WEEE. This ‘end of life’ WEEE should be recycled appropriately by the owner who should use proper treatment and recycling measures.
- Page 7 A100K12171 Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel, Vingtor-Stentofon and Phontech products are developed and marketed by Zenitel. The company’ s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001.
Need help?
Do you have a question about the ELSII-10HM+ and is the answer not in the manual?
Questions and answers