Page 1
PRODUCT MANUAL DOUBLE HAMMOCK KIT TT402DK 200KG CAPACITY HAMMOCK FABRIC SIZE: 160(W) x 210(L)cm HAMMOCK STAND MAX SIZE: 330(L) x 100(W) x 100(H)cm WARNING Read instructions before use and keep for future reference. Failure to read these instructions before use can lead to an increased risk of injury. When installing always check with a qualified builder for safety.
SAFETY INSTRUCTIONS Thank you for purchasing a Two Trees hammock. We at Two Trees know the importance of spending time relaxing. Hence we’ve developed a range of quality hammocks and convenient accessories that come with easy to follow instructions so that you will be relaxing in no time. It is important to read all instructions before use and take care when using your hammock.
SAFETY INSTRUCTIONS SELECTING THE LOCATION There are many ways to hang your hammock, here are some of our favourite and recommended options: BETWEEN BETWEEN TREES TWO POSTS BETWEEN ON HAMMOCK TWO WALLS STAND THE TWO TREES HAMMOCKS RANGE INCLUDES...
THINGS TO CONSIDER WARNING Read instructions before use and keep for future reference. Failure to read these instructions before use can lead to an increased risk of injury. When installing always check with a qualified builder for safety. Hammocks will stretch by 5-10% after DO NOT twist or knot suspension cords when hanging.
Page 5
HOW TO HANG YOUR HAMMOCK To hang your Two Trees hammock you will require 3.0m two fixed points, such as trees, beams, posts, or dyna bolts into brick walls. Alternatively you can purchase a Two Trees Universal Stand. Consult a qualified builder if unsure.
TEMPORARY INSTALLATIONS For Temporary instillations that are portable and do not require a fixed point we recommend using the Two Trees stand that was included in your double hammock kit (TT402DK). Assemble and set up your double Attach the hammock onto the hooks at...
Page 7
ENJOYING YOUR HAMMOCK HOW TO RELAX IN YOUR HAMMOCK Open the hammock fabric in the centre of Gently lie back on a diagonal with your the hammock and slowly and safely sit in head on the edge of the hammock. the middle as you would in a chair.
Page 8
DOUBLE HAMMOCK KIT STAND PARTS LIST OF PARTS A Metal arm pipe with fixed screws, 42mm DIA x 1060mm B End angle tube C Center base spreader tube, 36mm DIA x 540mm D Metal stand pipe, 40mm DIA x 985mm E Plastic stand feet F Plastic inside collar G Plastic external collar...
Page 9
HAMMOCK STAND ASSEMBLY INSTRUCTIONS a. Place F (plastic inside collars) in either side of the small brace tube of B (end angle tube). b. Insert D (metal stand pipe) into either side of the small brace tube of B (end angle tube). c.
Page 10
HAMMOCK STAND ASSEMBLY INSTRUCTIONS a. Take E (plastic stand feet) and attach to end of D (metal stand pipe). b. Repeat on all sides. a. Attach I (double polycotton hammock) into the hooks at either end. b. Ensure that the hammock and suspension cords are not twisted.
Need help?
Do you have a question about the TT402DK and is the answer not in the manual?
Questions and answers