Page 1
PRODUCT MANUAL SINGLE HAMMOCK CHAIR KIT TT601CK 120KG CAPACITY HAMMOCK FABRIC SIZE: 100(W) x 130(L)cm HAMMOCK STAND SIZE: 100(DIA) x 205(H)cm WARNING Read instructions before use and keep for future reference. Failure to read these instructions before use can lead to an increased risk of injury. When installing always check with a qualified builder for safety.
SAFETY INSTRUCTIONS Thank you for purchasing a Two Trees hammock. We at Two Trees know the importance of spending time relaxing. Hence we’ve developed a range of quality hammocks and convenient accessories that come with easy to follow instructions so that you will be relaxing in no time. It is important to read all instructions before use and take care when using your hammock.
SAFETY INSTRUCTIONS Only use Two Trees stand or Two Trees installation kits specifically designed for the product. If using an installation kit to hang your hammock chair from a tree or a load bearing beam please check with a qualified builder prior to installation. The hammock needs to be checked for wear and tear regularly and replaced if necessary.
THINGS TO CONSIDER WARNING Read instructions before use and keep for future reference. Failure to read these instructions before use can lead to an increased risk of injury. When installing always check with a qualified builder for safety. > 120KGS DO NOT twist or knot suspension cords when hanging.
Page 5
HOW TO HANG YOUR HAMMOCK 3.0m Should you not want to use your included stand and would like Load bearing beam to hang from a tree or structural beam, follow the below guide. To hang your Two Trees hammock you will require one fixed point, such as a tree or structural beam.
Page 6
ENJOYING YOUR HAMMOCK HOW TO RELAX IN YOUR HAMMOCK Ensure that no suspension Gently open the cords are twisted or in hammock chair and a knot, with use your adjust pillows to a hammock will stretch suitable positions. 5-10% overtime. Sit down into the Feet may be gently lifted hammocks as if sitting...
Page 7
HAMMOCK CHAIR KIT STAND PARTS LIST OF PARTS Base Tube A Base Tube B Support Pipe A Support Pipe B Hanging Spring Hook Bolt Hexagon Socket Button Screw Hexagonal Socket Screw Outer With Washer Hexagonal Socket Screw Outer Screw Cap Dome Nut Plastic Stand Caps Large M Plastic Stand Caps Small...
Page 8
CHAIR HAMMOCK FRAME ASSEMBLY INSTRUCTIONS Assemble parts A + B (Hammock Base) by sliding the tubing together and secure using parts I + K (nut & Bolt) ensuring that each component is tight using the hexagonal Allen Key and spanner provided.
Page 9
CHAIR HAMMOCK FRAME ASSEMBLY INSTRUCTIONS Attach part D (Hammock Pole Extension) into part C using parts J + H and ensure they are securely tightened using the hexagonal Allen Key and spanner provided. Take part F (Hammock Support Pin) and feed it through the hole at the end of part D.
Need help?
Do you have a question about the TT601CK and is the answer not in the manual?
Questions and answers