Bat1： Cmos Battery - MSI MPG Z790I EDGE WIFI User Manual

⚠
CAUTION
Do not connect the wrong type of LED strips. The JRGB connector and the JARGB_V2
connector provide different voltages, and connecting the JARGB_V2 5V LED strip to
the JRGB connector will result in damage to the LED strip.
⚠
Important
We strongly recommend that you install LED strips with the same specification to
∙
achieve the best effects.
Always turn off the power supply and unplug the power cord from the power outlet
∙
before installing or removing the addressable RGB LED strip.
∙ Please use MSI's software to control the extended LED strip.
BAT1： CMOS Battery
If the CMOS battery is out of charge, the time in the BIOS will be reset and the data of
system configuration will be lost. In this case, you need to replace the CMOS battery.
WARNING
KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical burns, perforation of soft tissue, can death.
∙
∙ Severe burns can occur within 2 hours of ingestion.
∙ If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
Replacing CMOS battery
1. Unplug the battery wire from the BAT1 connector and
remove the battery.
2. Connect the new CR2032 battery with wire to the
BAT1 connector.
40