Advertisement
Attaching the center speaker to
the plasma display stand
• The supplied accessories are for use only with
the PDK-FS03 plasma display floor stand.
Please do not use with any other plasma display
stand.
• For good sound and also to prevent accidents, use
the supplied fixing bracket to attach the speaker to
the plasma display stand.
Supplied accessories
Hook x 1
Small screws x 2
Attaching the speaker to the stand
1
Fix the hook to the speaker as shown using the
two small screws supplied.
Hook
Small screws x 2
2
Connect the speaker cable.
Connect to the speaker jacks on the subwoofer
Fixing bracket x 1
Washer screws x 2
Pass through here
3
Mount the speaker on the plasma display stand.
1
Slot in the center speaker
2
Attach the fixing bracket
PDK-FS03 plasma
display
floor stand
4
Secure the fixing bracket to the stand using the
two washer screws.
Plasma display stand (rear)
Fixing bracket
The front panel of the speakers (the part that
actually produces the sound) is very fragile. to avoid
damaging them, do not touch directly, allow objects
to come into contact with, or put stickers on these
panels. Be especially careful of young children
accidently damaging them.
Speaker panels
Front/satellite speakers
1
2
Hook
Washer screws x 2
Center speaker
<SRK1028-A>
Advertisement
