Linksys SD2005 Product Data

Wire-speed switching and Linksys
reliability in a 5-port Gigabit switch
Five 10/100/1000Mbps,
half/full duplex,
switched ports
5-Port 10/100/1000 Gigabit Switch
SD2005
Model No.
The 5-Port 10/100/1000 Gigabit Switch provides non-
blocking, wire speed-switching for your 10, 100, and 1000
megabit network clients. Drop this switch in place of your
current workgroup hub or switch, and you can upgrade
your high-requirement workstations to full Gigabit speeds as
necessary, while continuing to service other clients at their
current speeds. Or build your network from the ground up,
with appropriate link speeds for each user's requirements.
Either way, it's perfect for graphics, multimedia, and other
applications that have to move large files across the
network quickly.
With the 5-Port 10/100/1000 Gigabit Switch, you can
connect your existing 10/100 Ethernet network to a Gigabit
server backbone without any additional equipment. All
ports have automatic MDI/MDI-X crossover detection, so
you don't have to worry about the cable type. Each port
independently and automatically negotiates for best
speed and whether to run in half- or full-duplex mode.
Address learning and aging is supported, as well as 802.3x
flow control with head-of-line blocking prevention to keep
your high-speed clients from bogging down in lower-speed
traffic. Fast store-and-forward switching prevents damaged
packets from being passed on into the network.
World famous Linksys reliability and the limited lifetime
warranty give you peace of mind and the new ultra-
compact case design is sure to fit into your workgroup
environment. Let the Linksys 5-Port 10/100/1000 Gigabit
Switch kick your network into high gear.
Forwards and filters
packets at non-
blocking, full wire
speed
All ports have auto
speed negotiation
and auto MDI/MID-X
crossover detection
Linksys reliability and
limited lifetime
warranty
Product Data