Download Print this page
Milestone Husky X2 Upgrade

Milestone Husky X2 Upgrade

Hide thumbs Also See for Husky X2:

Advertisement

Quick Links

Milestone Systems
Milestone Husky™ X2 NVR BIOS upgrade Z970-005
Quick guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the Husky X2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Milestone Husky X2

  • Page 1 Milestone Systems Milestone Husky™ X2 NVR BIOS upgrade Z970-005 Quick guide...
  • Page 2 Quick guide | Milestone Husky™ X2 NVR BIOS upgrade Z970-005 BIOS upgrade introduction This document explains how to perform a BIOS upgrade on your Milestone Husky unit using the Z970-005 BIOS upgrade software released by Milestone. This BIOS upgrade applies to Milestone Husky X2.
  • Page 3 Quick guide | Milestone Husky™ X2 NVR BIOS upgrade Z970-005 Determine the BIOS version BIOS upgrade is a sensitive process. Make sure that the power plug is firmly plugged in before you start the upgrade. To see the current BIOS version of your unit: 1.
  • Page 4 Quick guide | Milestone Husky™ X2 NVR BIOS upgrade Z970-005 Prepare the BIOS settings for the upgrade To make the BIOS settings ready for the upgrade: 1. Select Advanced in the BIOS menu. 2. Select PCH-FW Configuration and press Enter.
  • Page 5 Quick guide | Milestone Husky™ X2 NVR BIOS upgrade Z970-005 5. Navigate to Save & Exit in the BIOS menu and select Save Changes and Reset. 6. Press Enter and select Yes to save the configuration and reset. The unit restarts.
  • Page 6: Upgrade The Bios

    Quick guide | Milestone Husky™ X2 NVR BIOS upgrade Z970-005 Upgrade the BIOS Remember to save and extract the BIOS upgrade folder on your unit before you start the upgrade. 1. To start the BIOS upgrade process, click Windows Start and type cmd to open a Windows Command Prompt.
  • Page 7 Quick guide | Milestone Husky™ X2 NVR BIOS upgrade Z970-005 3. Navigate to the folder where you have unpacked the Z970-005 BIOS upgrade files by using the cd (change directory) command. In this guide, the example of the extracted BIOS upgrade file location and folder name is: cd C:\Z965-006 2018-01-02 FINAL.
  • Page 8 Quick guide | Milestone Husky™ X2 NVR BIOS upgrade Z970-005 5. If a warning appears, press y to start the BIOS upgrade process. The update process takes around two minutes. If the upgrade is successful, the Command Prompt messages match the messages seen below.
  • Page 9 Quick guide | Milestone Husky™ X2 NVR BIOS upgrade Z970-005 Verify the BIOS version after upgrade To verify that the BIOS version was successfully upgraded: 1. Unplug the power cord and wait for 30 seconds. 2. Plug in the power cord. The unit boots.
  • Page 10 About Milestone Milestone Systems is a leading provider of open platform video management software; technology that helps the world see how to ensure safety, protect assets and increase business efficiency. Milestone Systems enables an open platform community that drives collaboration and...