Plasma Sterilization Process
7.6
L34 is compatible with STERRAD
50,100S and 200). This manual does not describe the instructions
of STERRAD
®
STERRAD
system regarding the operation.
7.6.1
STERRAD
Ensure that the probe is cleaned in accordance with the
procedure stated in "7.3 Cleaning Process" before the
sterilization. Perform sterilization operations by
following the instructions of the manufacturer.
Confirm the sterilization condition before performing
sterilization. The sterilization by other than the specified
condition causes the probe to malfunction.
DM 120918 v2
®
system, therefore, follow the instructions of your
®
Sterilization (Johnson & Johnson Product)
WARNING
®
Plasma Sterilization (STERRAD
- 16 -
®
Q1E-EP1441