Page 2
2. HARDWARE SETUP 2.1. Secure the YOKO/YOKO+ to your desk with the included clamp (C). If your desk is thicker than 30 mm (about 1.1 inches), we recommend using the "Extra Clamp" for the YOKO/YOKO+ sold separately at our website (www.virtual-fly.com/shop/accesorios/yoko-clamp).
Page 3
3. SOFTWARE SETUP The YOKO/YOKO+ interacts with any computer as a joystick (HID) so it is compatible with any flight simulation software. Below, you have 2 If you use MSFS or X-Plane, set a blank profile to the YOKO/ options for setting up your YOKO/YOKO+ with the most popular flight YOKO+ in the controls or joystick menu before using your simulation software: MSFS, Prepar3D, and X-Plane.
Page 4
4. BASIC CONFIGURATION The YOKO/YOKO+ interacts with any computer as a joystick (HID). Being a joystick makes it compatible with any flight simulation software. Below, you have a general scheme for setting up your YOKO/YOKO+ with the most popular flight simulation software: MSFS, Prepar3D, and X-Plane. If you own a YOKO, you must calibrate your device using Windows Calibration before configuring it inside your preferred flight simulation software.
Need help?
Do you have a question about the VirtualFly YOKO and is the answer not in the manual?
Questions and answers