Maintenance - PRETUL CALA-P3 Manual

Maintenance

WARNING
Disconnect the cord from the power
outlet before making adjustments, service or maintenance on
the tool.
Cleansing and Care
• Keep the tool free of dust. Never use water or
chemical-based cleansing materials to clean the tool.
Clean only using a clean and dry cloth.
• Keep the ventilation slots always clean and free of
obstructions to guarantee the right cooling of the motor.
• Double-check the power cable regularly to detect any
type of damage. Go to a Authorized
Service Center when damaged to replace the cable.
Service
• The tool should only be serviced in a
Authorized Service Center. Service and maintenance carried
out by non qualified people may be dangerous and could
cause severe personal injury. It also makes the product
Warranty void.
Carbon Brush Replacement
• Carbon Brushes need to be check regularly and when
worn, replaced in a Authorized
Service Center. After the carbons have been replaced, ask
the technician to inspect if they run freely in the carbon
housing and to let the machine run 5 minutes to even the
contact of carbon and commuter.
• Use only original carbon brushes,
designed specifically with the strength and electric
resistance needed for each type of motor. Carbon brushes
that are out of the specifications may damage the motor.
• When replacing carbon brushes, always change both.
8
ENGLISH