MORDOMUS iZSIRI1 User Manual

Z-wave indoor siren

Table of Contents

Download this manual

USER MANUAL

Z-WAVE INDOOR SIREN

iZSIRI1

Z-Wave Certified Device

WELL DONE!

You have picked the finest solution for your smart home, congrats!

Now it's time to enjoy these great features of your new product:

- Audible and visual alarm

- Wireless control, notifications, and trigger by other smart home devices (when included to

a Z-Wave gateway controller)

- Z-Wave Plus with improved 500 chip for faster and safer wireless communication

- Acts as signal repeater when powered by AC adapter

- Sleek design and compact size

SPECIFICATIONS

Model Number: iZSIRI1

Z-Wave Signal Frequency: 908.42 MHz

Volume: 110dB

Power: DC 5V/1A and 4 AAA (1.2V) batteries for back-up power

Range: Up to 100 feet line of sight

Operating Temperature: 14°F to 122°F

Operating Humidity: ≤ 80%

Installation and Use: Indoor only

www.mordomus.com

Table of Contents

Do you have a question about the iZSIRI1 and is the answer not in the manual?

Page 1 - Z-Wave Plus with improved 500 chip for faster and safer wireless communication - Acts as signal repeater when powered by AC adapter - Sleek design and compact size SPECIFICATIONS Model Number: iZSIRI1 Z-Wave Signal Frequency: 908.42 MHz Volume: 110dB Power: DC 5V/1A and 4 AAA (1.2V) batteries for back-up power Range: Up to 100 feet line of sight Operating Temperature: 14°F to 122°F...
Page 2 Let us know if you are having any issues installing or operating the device. Our fast and friendly tech support is here to help: ioline@ioline.pt Go to mordomus.com to find out how to make your home smarter and safer. INSTALLATION Unscrew the back cover of the indoor siren and insert 4 AAA rechargeable batteries or use the USB power adapter included in the box.
Page 3 - Keep away from chemicals, water, and dust - Ensure the device is never close to any heat source or open flame to prevent fire - Ensure the device is connected to an electric power source that does not exceed the maximum load power www.mordomus.com...
Page 4 - Reorient or relocate receiving antenna - Increase the separation between equipment and receiver - Connect equipment into a separate outlet or circuit from receiver - Consult the dealer or an experienced radio/TV technician for additional assistance www.mordomus.com...