English
Figure 2
Connection
panels on the two
units
Choosing a place for each unit
Get user manuals:
See SafeManuals.com
Dansk
Deutsch
What distinguishes the two units
The connection panel on each unit identifies it by name: TRANSMITTER or RECEIVER. Two
Bose
®
link jacks and a Channel button further distinguish the transmitter.
For compatibility, the two units have a matching Setup Code, set at the factory with both
switches in the "down" position (Figure 2). A Status LED lights when each unit is plugged in
and the two units are communicating.
Transmitter
Bose
®
link jacks
Note: For information on the meaning of the different Status LED lights, refer to
"Check the indicators and settings" on page 9.
Place the transmitter in the same room with the LIFESTYLE
receiver in the same room with your Bose
Note: Use of the audio link with products that are not Bose link-compatible requires an adapter
cable. For further information, refer to "Instructions for non-Bose or older Bose
page 8.
Considerations for positioning:
• Place each unit upright with all feet flat on a level surface, such as a floor, table, or shelf.
• Do not tip either unit on its side.
• Place each unit within 2 meters (7 feet) of the product to which it is connected (using the
supplied Bose link A cable).
• Keep the two units within 23 meters (75 feet) of each other.
• Be aware that the strongest signal direction is above and around, not below,
the transmitter.
Español
Français
Channel switch
Bose link jack
Status LED
®
link expansion product.
Italiano
Nederlands
I
NTRODUCTION
Receiver
®
system media center. Place the
®
products" on
Svenska
5