RSL Speedwoofer 105MK2 Quick Start Manual

Table of Contents

Download this manual

For those already familiar with our award-winning Speedwoofer 10S and think bass doesn't get any

better, be prepared for a surprise. Your new Speedwoofer 10S

dazzled, and used up many of audio's best adjectives. The new Speedwoofer 10S

erful amplifier for higher output in all ranges as well as digging deeper in the bass. Now, an integrated

DSP maximizes performance at all frequencies. Yet, the precision and accuracy the Speedwoofer is known

for, is improved.

The enjoyment of your Speedwoofer is dependent on several factors including, positioning, room acous-

tics, and the settings on the amplifier or device that supplies the audio signal. We strongly suggest that

you download our owner's manual at

stuff at a minimum.

We want your new Speedwoofer 10S

we'll be happy to provide the high level of customer service we're known for.

Steps To Bass Nirvana

1. Save all packing materials in the unlikely event your Speedwoofer needs servicing in the future.

2. Find the right location for your Speedwoofer, where the bass is distributed evenly among your seating

positions. This is dependent on your room's acoustical characteristics. We suggest experimenting.

3. Connect your subwoofer to your A/V receiver or amplifier using an RCA cable or the optional wireless

transmitter. For home theater, you'll run the cable from the receiver's subwoofer out to the Speed-

woofer's LFE in. For stereo, use the Line In inputs and select the correct crossover setting on the sub-

woofer.

4. Run the auto-setup of your receiver (even if you've run it previously).

5. Refer to the diagram and our explanations to set the controls of the Speedwoofer.

Quick Start Guide

www.rslspeakers.com/manuals.

to live up to its full potential. If it doesn't seem to, contact us and

10S

ups the ante. The original 10S amazed,

has a new more pow-

We tried to keep the boring

Table of Contents

Do you have a question about the Speedwoofer 105MK2 and is the answer not in the manual?

Page 1 Quick Start Guide For those already familiar with our award-winning Speedwoofer 10S and think bass doesn’t get any better, be prepared for a surprise. Your new Speedwoofer 10S ups the ante. The original 10S amazed, dazzled, and used up many of audio’s best adjectives. The new Speedwoofer 10S has a new more pow- erful amplifier for higher output in all ranges as well as digging deeper in the bass.
Page 2 Power Indicator - When the LED is red, the Speedwoofer is in standby mode. After receiving a signal, the LED turns green or blue (depending on version of Speedwoofer) and your subwoofer is in operation mode. No light means the sub isn't receiving power. Re-check the power switch and AC power connec- tion.
Page 3 Dimensions: 16"H x 15"W x 17 3/4" D (Including AC Cord) Weight: 45 lbs Care And Maintenance Caring for your RSL Speedwoofer is relatively easy and does not require much on your part. We have listed the most important dos and don’ts below.
Page 4 Here are the terms (sorry, our lawyer made us do this): RSL warranties your speakers for a period of 5 years from the date of purchase. We warranty our sub- woofer amplifiers for a period of 2 years from the date of purchase. Our products are warranted to be free of defects in original materials and workmanship.