Support Software - Panasonic WX-SR204P Operating Instructions Manual

Support software

Connect the receiver to the configuration/maintenance PC installed the support software to
configure the 1.9 GHz digital wireless microphone system and monitor its status.
The functions of the support software are as follows. Refer to the support software manual
for further details.
⿟ Some of the functions of this system cannot be configured without the
Important support software. Refer to a retailer for information on obtaining the
support software.
Receiver status
indicator
Antenna status
indicator
Microphone
status indicator
Pairing mode
Pairing
confirmation
Delete pairings Delete microphone-receiver pairings.
Name
registration
Select Field
Stand-by
Network
settings
Add/edit users
Add/edit
receivers
Add/edit
groups
Function
Shows the connection status and synchronization
status of the system
Shows the status of connected antennas and their
selected antenna field.
Shows information on paired microphones, their
remaining battery level, their sensitivity, and their LCF
settings.
Sets the receiver to microphone-pairing mode
Confirms the microphones connected to the receiver
Edits names for receivers, microphones, and antennas.
Allows to select antenna fields for individual antennas.
Sets the delay between the microphone being turned
OFF and the microphone entering stand-by.
Sets the IP address, subnet mask, default gateway,
and port of the receiver.
Adds users and sets their permissions to use system
(receiver).
Register receivers connected to the support software
and shows their settings.
Sets groups for receivers.
Requires
support
software
●
●
( * )
●
●
●
●
●
57