Download Print this page

EUCHIPS EUP10D-1HMC-0-120 Quick Manual

Advertisement

Quick Links

EUP10D-1HMC-0-120
(Product No.: 3.04.001575)
Summary
EUP10D-1HMC-0-120 is a 10W AC/DC constant current mode output LED driver featuring the multiple levels
selectable by DIP switch and complies with DALI standard protocol IEC 62386. EUP10D-1HMC-0-120 can be
connected to DALI main controller or Touch DIM(Push DIM) to achieve a smooth dimming effect.
Product Feature
·Single channel output, output current level selectable by DIP S.W.
·Meet DALI Protocol IEC 62386-207
·Support Touch DIM (Push DIM)function
·High efficiency up to 82%
·Built-in active PFC function
·Dimming effect smooth, no flicker
·Protections: Short circuit, over load, no load
·Suitable for indoor LED lighting application, such as down light, spot light, and so on
Technical Parameters
Model
EUP10D-1HMC-0-120
Efficiency
Voltage
Frequency
Power Factor
Input
THD
Current
Inrush Current
Current/voltage/power
Ripple Current
Channel
Output
Current Tolerance
Standby Power
No Load Output Voltage
Turn On Delay Time
Dimming Mode
Function
Dimming Range
No Load
Protection
Short Circuit
Over Load
Surge
Safety
Withstand Voltage
DALI Standrad
Working Temp.
Storage Temp.; Humidity
tc
Material
IP Rating
Others
Lifetime
Warranty Condition
Switch Cycle
Packing Size
Dimension
G.W
User's manual: 2019-8
82%@230VAC, Full load
200VAC-240VAC
50/60Hz
0.95@230VAC, Full load
<10%@230VAC, Full load
0.06Amax@230VAC, Full load
cold start,10A(twidth=10us measured at 50% Ipeak@230VACC
120mA/9-45VDC/5.4W
150mA/9-45VDC/6.75W
220mA/9-45VDC/9.9W
250mA/9-40VDC/10W
<3%
Current Selection Table
1
±5%
120mA
ON OFF
<0.5W
9-45V
50VDC
Remark: Function default setting is: 120mA (@switch are all OFF state)
<1s, at 230Vac
DALI /
Touch DIM(Push DIM)
1%-100%
The LED Driver will not be damaged.
No Output, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
L-N:500V
I/P-O/P: 1500VAC
IEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-207: 2009, DALI 1.0
-20℃~50℃
-40℃~85℃, 20-90%RH
75℃
PC
IP20
50,000h@tc:75℃
5 years
>100,000 times
515*235*140mm(L*W*H), 9.5Kg/Carton/100PCS
110*30*22.5mm(L*W*H)
60g
1/2
DALI Constant Current Dimming Driver
170mA/9-45VDC/9.9W
270mA/9-37VDC/9.99W
150mA
170mA
220mA
220mA
9-45V
9-45V
9-45V
9-45V
200mA/9-45VDC/9W
300mA/9-33VDC/9.9W
250mA
270mA
300mA
9-40V
9-37V
9-33V
www.euchips.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the EUP10D-1HMC-0-120 and is the answer not in the manual?

Questions and answers

Summary of Contents for EUCHIPS EUP10D-1HMC-0-120

  • Page 1 (Product No.: 3.04.001575) Summary EUP10D-1HMC-0-120 is a 10W AC/DC constant current mode output LED driver featuring the multiple levels selectable by DIP switch and complies with DALI standard protocol IEC 62386. EUP10D-1HMC-0-120 can be connected to DALI main controller or Touch DIM(Push DIM) to achieve a smooth dimming effect.
  • Page 2 DALI Constant Current Dimming Driver Dimension(mm) Wiring Diagram DALI Master Lamp 110.0 LED - Input LED+ EUP10D-1HMC-0-120 220-240VAC DALI Wiring Diagram Push DIM(Touch DIM) Diagram DALI Controller Push DIM Pannel(Touch DIM) DALI Driver 1 LED- LED+ DALI Driver 1 LED-...
  • Page 3 DALI恒流调光驱动器 EUP10D-1HMC-0-120 (产品代码: 102100201) 概述 EUP10D-1HMC-0-120是一款可以提供120/150/170/200/220/250/270/300mA 8档电流的LED 驱动器。输出电流可以过DIP拨码开关简易设置, 符合DALI标准协议IEC62386. 用DALI主控/ Touch DIM(PushDIM)开关调光,曲线平滑、无闪烁。 产品特点 ·单通道输出,输出电流可通过DIP拨码开关选择 ·遵循DALI协议标准 IEC62386-207 ·支持Touch DIM(Push DIM)功能 ·效率高达 82% ·内建主动式PFC功能 ·调光效果平滑,无闪烁 ·保护:短路保护,过载保护,空载保护 ·适用于LED室内灯具,比如筒灯,射灯等 技术参数 型号 EUP10D-1HMC-0-120 效率 82%@230VAC, 满载 电压 200VAC-240VAC 频率 50/60Hz 功率因素 0.95@230VAC, 满载 输入 <10%@230VAC, 满载...
  • Page 4 0.97 0.965 0.96 0.955 0.95 230Vac 0.945 环境温度 (℃) 负载(%) 输入信号(%) THD VS 负载 效率 VS 负载 95.00 90.00 85.00 80.00 75.00 230Vac 70.00 负载(%) 负载(%) 注意事项: 1、本产品请由具有专业资格的人员进行调试安装。 2、本产品不能防水,需避免日晒雨淋,如安装在户外,请用防水箱。 3、良好的散热条件会延长产品的使用寿命,请把产品安装在通风良好的环境。 4、请检查使用的LED电源输出电压电流,是否符合产品要求。 5、出于安全考虑,推荐输入和输出(信号端除外)用0.75-1.5mm² PVC或橡胶线缆,并确保接线牢固,以免电线过热或接触不良触发事故。扁平电源线不适用。 6、通电调试前,应确保所有接线正确,以避免因接线错误而导致灯具损坏。 7、如果发生故障,请勿私自维修;如果有疑问,请联系供应商。 ※ 本说明书内容如有更新,恕不另行通知。若您使用的产品功能与说明书不一致时,请以产品为准。如有疑问请与我们联系。 用户手册: 2019-8 www.euchips.com...