LG CineBeam PF50KS Owner's Manual page 131

82
Keystone
(Q. Settings)
To prevent the screen image from becoming trapezoidal, Keystone adjusts the top
and bottom width of the image if the projector is not set at a right angle to the
screen.
PJT Mode
(Q. Settings)
This function turns the projected image upside down or flips horizontal.
Auto Power
(Q. Settings)
Makes the projector turn on automatically when the power cord is connected to
the projector. However, battery-equipped models will immediately turn on once the
power switch is put to
• For PF50K model only:
- On: When the projector's power switch is put to
- Off: When the projector's power switch is put to
standby mode.
• For HU80K model only:
- On: When the power code is connected to the projector, it turns on
automatically.
- Off: When the power code is connected to the projector, it goes into standby
mode.
General Keystone
General PJT Mode
General Auto Power
.
, the projector turns on.
, the projector goes into