Subscribe to Our Youtube Channel
Related Manuals for Iget HOMEGUARD HGNVK-930CAM
Summary of Contents for Iget HOMEGUARD HGNVK-930CAM
- Page 1 Add-on Camera for iGET Homeguard 5300 Series 1080p HD PoE Bullet CCTV Camera www.iget.eu/cs/helpdesk-centrum-cs https://helpdesk.intelek.cz/ Instruction Manual - HGNVK-930CAM / EN...
- Page 2 Be Protected & High-accuracy Motion Alert Welcome IP66 Thank you for choosing iGET HOMEGUARD...
-
Page 3: Specifications
What’s in the box Specifications Item Description Sensor 1/2.7” 2.0MP Video Compression H.265/H.264 Image Resolution PAL: 25fps @ 1080p (1920×1080); NTSC: 30fps @ 1080p(1920×1080) PIR Detection Angel 120˚ PIR Detection Distance 7m / 23ft Minimum Illumination 0.1LUX User Manual PoE Bullet Camera Ethernet Cable Signal System PAL/NTSC... -
Page 4: Connecting The Camera
Introduction Connecting the Camera Each Homeguard PoE Bullet camera is supplied with a mounting kit for attaching it to a wall or ceiling. Before you affix the camera in To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the camera then plug the position, please ensure the cable is of adequate length to reach the NVR. -
Page 5: Mounting The Camera
Mounting the Camera Camera Location Tips The camera can be mounted onto a flat surface using screws. The surface must have sufficient strength to hold the camera. 1. What you want to monitor and where you’ll get the best view of it. Position the camera in the location you want to mount it, and mark the screw holes on the surface to position the screws. -
Page 6: Troubleshooting
Troubleshooting Warranty & Support No picture / signal All the products sold are covered by 24 months warranty from the date of invoice. 1080p cameras are compatible with 1080p HD NVR recorders. • Warranty instructions: Ensure the camera is connected to a compatible NVR by ethernet cable. •...
Need help?
Do you have a question about the HOMEGUARD HGNVK-930CAM and is the answer not in the manual?
Questions and answers