Summary of Contents for Iget HomeGuard HGNVK936CAM
Page 1
Add-on Camera for iGET Homeguard PoE x4900x Series 4K Ultra HD PoE Bullet CCTV Camera www.iget.eu/cs/helpdesk-centrum-cs https://helpdesk.intelek.cz/ Instruction Manual - HGNVK-936CAM / EN...
Page 2
Be Protected & High-accuracy Motion Alert Welcome IP66 Thank you for choosing iGET HOMEGUARD...
What’s in the box Specifications Item Description Sensor 1 /2.3" 8.0MP Video Compression H.265/H.264 Image Resolution PAL: 15fps@3840x2160; NTSC: 15fps@ 3840x2160 PIR Detection Angle 120· PIR Detection Distance 23ft Minimum lllumination 0.1 Lux @ F1 .2 (AGC ON), O Lux with IR User Manual PoE Bullet Camera Ethernet Cable...
Introduction Connecting the Camera Each Homeguard PoE Bullet camera is supplied with a mounting kit for attaching it to a wall or ceiling. Before you affix the camera in To connect the camera to your NVR, simply connect the supplied Ethernet cable to the LAN connection on the camera then plug the position, please ensure the cable is of adequate length to reach the NVR.
Mounting the Camera Camera Location Tips The camera can be mounted onto a flat surface using screws. The surface must have sufficient strength to hold the camera. 1. What you want to monitor and where you’ll get the best view of it. Position the camera in the location you want to mount it, and mark the screw holes on the surface to position the screws.
Troubleshooting Warranty & Support No picture / signal All the products sold are covered by 24 months warranty from the date of invoice. 4K cameras are compatible with 4K HD NVR recorders. • Warranty instructions: Ensure the camera is connected to a compatible NVR by ethernet cable. •...