Connections
External equipment and cables shown are not
≥
supplied with this TV.
Please ensure that the unit is disconnected from the
≥
mains socket before attaching or disconnecting any
cables.
Check the terminal type and cable plugs are correct
≥
for connection.
Use a fully wired HDMI compliant cable.
≥
Keep the TV away from electronic equipment (video
≥
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
Please also read the manual of the equipment being
≥
connected.
Terminals
5 6 7
8
1 Model name plate
2 Headphone / Subwoofer jack
(3.5 mm stereo mini plug)
3 USB 2 - 3 port
This symbol indicates DC operation.
4 HDMI 4
5 DIGITAL AUDIO OUT
6 ETHERNET terminal
Use Shielded Twist Pair (STP) LAN cable.
≥
7 AV IN
8 HDMI 1 - 3
9 USB 1 port
This symbol indicates DC operation.
10 Aerial terminal
12
English
1
2
3
4
9
Basic connections
∫ AV devices
(DVD Recorder / Blu-ray Recorder, Set top box, etc.)
For details, refer to [eHELP] (Search by Purpose >
≥
Watching > Basic > Basic connection).
∫ Aerial
(For viewing digital / analogue broadcasts)
Special notices for receiving digital terrestrial
services
≥
If you receive analogue and digital TV signals through
two separate aerials, use an RF mixer to mix them.
TV
RF cable
RF mixer
Aerial (Analogue TV)
Aerial (Digital TV)
≥
If you receive analogue TV signals through a cable TV
network, an aerial is required to receive digital TV
signals.
In this case, using an RF mixer is not recommended
because the TV signals interfere with each other.
≥
An RF selector is available to switch analogue and
digital TV signal.
TV
10
RF cable
RF selector
Aerial (Digital TV)
Cable
(Analogue TV)