Installation - Black Box Data Alarm SW705A Manual

3.1 Before You Install
As you unpack your Data Alarm, make sure that you
received (1) Alarm unit, (1) detachable power cord, and
(1) copy of this manual. If you didn't receive something,
or if anything is damaged, notify your supplier immediately.
Before installing your Data Alarm, put on insulated
gloves. (You should always wear gloves when installing
cabling or in-line devices, especially when significant
voltages could be transmitted across the cables.) We also
recommend that, where possible, you turn off the data-
source device (the one whose data transmissions you want
the Data Alarm to monitor) and data-destination device
and disconnect them from their power sources.
During installation, you should never work on both
sides of your data circuit at the same time. Do not
connect both cables to your Alarm simultaneously—if
you do, you could become part of a circuit and risk
electrical shock.

3. Installation

CAUTION!
CHAPTER 3: Installation
5