Tool Description; Operation - Leister 143.830 Operating Instructions Manual

Tool description

1
8
5
6
Preparation
Place the tool on a safe and stable work surface.
• Mount handle for hand press (1) with two socket screws (11).
• Cut test material (maximum cut width 150 mm).
• The test material must be dry and clean

Operation

• When placing the test material on the cutter bar (5), the weld seam must
be in the middle and diagonal to the cutting blade (3).
• Press handle (1) down until the test material has been cut by the cutting
blade (3).
• Remove the test piece.
• Once the work is complete, clean the tool. The blade, jacking beam and
cutter bar must always be clean and free from residues.
11
7
9
2
3
4
10 6
1 Handle for hand press
2 Jacking beam
3 Cutting blade
4 Protective plate for cutting blade
5 Cutter bar
6 Base
7 Housing cover
8 Ball lock pins with T handles for
housing cover
9 Ball lock pins with T handles for
cutting blade
10 Socket screw for cutting blade
11 Socket screws for handle
7