Leister Groover Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Leister Manuals
  4. Cutter
  5. GROOVER
  6. Operating instructions manual
Leister Groover Operating Instructions Manual

Leister Groover Operating Instructions Manual

Grooving machine
Hide thumbs Also See for Groover:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATING INSTRUCTIONS
GB
LEISTER Groover
Grooving machine
Please read operating instructions carefully before use
and keep for future reference.
APPLICATION
• Cutting welding grooves into floor coverings of:
tiles,
rolls,
nap-tiles and -rolls
2
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland
Tel. + 41- 41 662 74 74 Fax + 41- 41 662 74 16
4
www.leister.com
sales@leister.com
®

Advertisement

Table of Contents
loading

Related Manuals for Leister Groover

Summary of Contents for Leister Groover

  • Page 1 APPLICATION • Cutting welding grooves into floor coverings of: tiles, rolls, nap-tiles and -rolls LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland www.leister.com sales@leister.com Tel. + 41- 41 662 74 74 Fax + 41- 41 662 74 16...

  • Page 2: Technical Data

    WARNING Danger! Unplug the tool before opening it, as live compo- nents and connections are exposed. Use earmuff! Risk of injury from touching the cutting blade. Risk of injury by ejected particles. Ejector pipe and dustbag must be fitted. CAUTION The voltage rating stated on the tool must correspond to the line/mains voltage.
  • Page 3 General Safety Rules WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
  • Page 4 General Safety Rules d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

  • Page 5: Operation

    OPERATION LEISTER Groover Description of tool 1. Power supply cord 13. Roller axle 2. Operating switch 14. Cutting blade cover 3. Locking button of operating switch 15. Threaded connection 4. Cutting speed switch 16. Ejector pipe 5. Handle 17. Dustbag 6 Hand rest 18.
  • Page 6 • Cutting speed switch (4) set to position 1 or position 2 depend from material thickness. • Hold the groover by the handle (5) (left hand) and by the hand rest (6) (right hand). • Align the marking arrows on the tool (red) with the grooving line. The adjustable guide roller (9) should run inside the grooving line and the rear roller (10) in the groove.
  • Page 7 ACCESSORIES LEISTER Groover • The LEISTER Groover is fitted with a tungsten carbide tipped cutting blade. • Only LEISTER tungsten carbide cutting blades should be used. • Only perforated blades should be fitted to the groover. Otherwise the suction pressure is too low.

  • Page 8: Maintenance

    • The carbon brushes of the tool's motor should be checked after about 1600 hours running time by your Service Centre. • Repairs have to be carried out by authorised LEISTER Service Centres only. They guarantee a specialized and reliable repair service within 24 hours using original LEISTER spare parts.

Table of Contents