Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Trotec VC 1200W
Summary of Contents for Trotec VC 1200W
- Page 1 VC 1200W OPERATING MANUAL WET AND DRY VACUUM CLEANER...
-
Page 2: Table Of Contents
• Do not immerse the device in water. Risk of electric shock! • Do not expose the device to directly squirting water. • Never insert any objects or limbs into the device. wet and dry vacuum cleaner VC 1200W... - Page 3 We recommend using the device with original Trotec accessories. wet and dry vacuum cleaner VC 1200W...
-
Page 4: Information About The Device
To ensure simple transportation the device comes equipped device may be damaged. with wheels and a transport handle. Note the information regarding transport and storage of The device is splash-proof (IPX4). the device. wet and dry vacuum cleaner VC 1200W... - Page 5 Swivel castors Spray floor nozzle On/off switch Spray nozzle button Suction pipe Wheels Cleaning agent reservoir Button for filter cleaning HEPA filter Foam filter Dust bag Spray hand nozzle Floor nozzle Crevice nozzle wet and dry vacuum cleaner VC 1200W...
-
Page 6: Transport And Storage
Max. capacity of the dust container for: Dry dirt Liquid dirt Max. capacity of the detergent tank 3.5 l Hose length 1.8 m Weight 7.5 kg Dimensions (length x width x height) 36 x 33 x 43.5 cm wet and dry vacuum cleaner VC 1200W... -
Page 7: Start-Up
ð The detergent pipe is not connected. opening on the bottom of the device. 2. Fasten the larger wheels at the rear (13) with two screws each. ð The wheels (13) will click into place. wet and dry vacuum cleaner VC 1200W... - Page 8 3. Insert the end of the detergent pipe (2) into the fitting and let go of the locking button (24) (II.). III. 4. If required, attach the second suction pipe (12) to the suction end of the first suction pipe (12) with the connection side (III.). wet and dry vacuum cleaner VC 1200W...
- Page 9 ð To do so, align the connecting piece so that the lugs on the fitting match the recesses on the connecting piece. 5. Turn the connecting piece attached in clockwise direction to fasten the connection (II.). wet and dry vacuum cleaner VC 1200W...
- Page 10 Remove the filter housing from the device head (27). 6. Insert the filter housing (28) into the device head (27) and tighten it in counter-clockwise direction. 7. Fit the device head (27) on the collection container (7). wet and dry vacuum cleaner VC 1200W...
- Page 11 Always use detergents sparingly in terms of environmental protection. Note Viscous detergent can block the device's pump. Dilute viscous detergent with water. 1. Open the cover of the detergent tank. wet and dry vacuum cleaner VC 1200W...
-
Page 12: Operation
4. Insert the detergent pipe of the tank into the suction connection of the detergent pump (23) (I.) and tighten it in clockwise direction (II.). ð The device is switched on. You can vacuum dry or wet dirt. wet and dry vacuum cleaner VC 1200W... - Page 13 1. Attach the desired nozzle as described in the Changing the nozzles chapter. 2. Switch the device to position I. 3. Move the nozzle slowly and steadily over the surface to be cleaned. ð Air and dirt particles are sucked into the nozzle. wet and dry vacuum cleaner VC 1200W...
-
Page 14: Available Accessories
• The air flow may not be adjusted correctly. Check the airflow controller and adjust it, if necessary. • The motor might be defective. Have a defective motor replaced by a specialist electrical company. wet and dry vacuum cleaner VC 1200W... -
Page 15: Maintenance
The device still does not operate correctly after these checks: Please contact the customer service. If necessary, bring the device to an authorised specialist electrical company or to Trotec for repair. wet and dry vacuum cleaner VC 1200W... - Page 16 8. Insert the filter housing (28) into the device head (27) and tighten it in clockwise direction. 9. Fit the device head (27) on the collection container (7). ð Air is blown through the filter. 10. Close the locks (5) on both sides of the device. wet and dry vacuum cleaner VC 1200W...
- Page 17 3. Empty the detergent tank (14). Changing the nozzles chapter. 4. Rinse the detergent tank (14) with water. 2. Rinse the spray nozzle with water. 3. Attach a new spray nozzle as described in the Changing the nozzles chapter. wet and dry vacuum cleaner VC 1200W...
-
Page 18: Disposal
Only for United Kingdom According to Waste Electrical and Electronic Equipment Regulations 2013 (SI 2013/3113) (as amended) devices that are no longer usable must be collected separately and disposed of in an environmentally friendly manner. wet and dry vacuum cleaner VC 1200W... - Page 19 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the VC 1200W and is the answer not in the manual?
Questions and answers